742377
10
Zoom out
Zoom in
Previous page
1/65
Next page
Display Modes
When you are listening to a FM station with RDS system, repeatedly press the Info
button to cycle through the information. This will only function if the reception level is
sufcientandclear.
a. Radio text Displays the message about the station being listened to as
ticker text.
b. Program type Displays the type of station being listened to, e.g. Pop, Classic,
News, etc.
c. Frequency Displays the frequency of the station being listened to.
d. Date Displays the date of today.
Scan sensitivity setting
The radio will normally scan all stations from FM broadcasts including the weaker
signals.However,youmaywishtheAuto-scantondonlythosestationswithstrong
enough signals to give good reception.
1. Press the Power button to turn on the radio.
2. Select the FM band by pressing the Source button.
3. Press the Menu button, the display shows “Scan setting”.
4. Press the Tuning / Select knob, display will show “Strong stations only?”.
5. Rotate the Tuning / Select knob to select between “Yes” or “No” (default is Yes).
The“Yes”optionwillallowtheradiotondstrongsignalsonlywhenscanning.
6. Press the Tuning / Select knobtoconrmyoursetting.Thedisplaywillreturnto
normal radio display.
PRESET STATIONS
Storing preset stations in DAB and FM modes
There are 20 memory presets in the radio, 10 for DAB and 10 for FM. Presets are
remembered by the radio in the event of a power failure.
For preset 1-5:
1. Press the Power button to turn on the radio.
2. Press the Source button to select the desired waveband.
3. Tune to the required station.
4. Press and hold the required Preset button until the display shows for example
“Preset 01 Stored”.
5. Repeat step 3 and 4 for the remaining presets.
For preset 6-10:
1. Press the Power button to turn on the radio.
2. Press the Source button to select the desired waveband.
3. Tune to the required station.
4. Press and hold the Preset button until the display shows the list of presets.
5. Turn the Tuning / Select knob until you reached the required preset number (1-10).
6. Press the Tuning / Select knob to store the preset.
Stations stored in the preset memories can be over-written by following the above
procedure.
Recalling preset stations in DAB and FM modes
For preset 1-5:
1. Press the Power button to turn on the radio.
2. Press the Source button to select the desired waveband.
3. BrieyPresstherequiredPreset button, the display will show, e.g. "P1", at the end
ofrstline.
For preset 6-10:
1. Press the Power button to turn on the radio.
2. Press the Source button to select the desired waveband.
3. BrieyPressthePreset button, the display will show the list of presets.
4. Turn the Tuning / Select knob until you reached the required preset number (1-10).
5. Press the Tuning / Select knob to select the preset. The display will return to
normal radio display.
BLUETOOTH
The Bluetooth mode on your Powerplayer allows you to play audio, play sound from
videolesandstreammusicfromBluetoothcapabledevicessuchasyourmobile
phone, computer, tablet etc. through your Powerplayer loudspeaker.
When a Bluetooth enabled device such as your Powerplayer is in a
‘discoverable’ state other Bluetooth devices can detect, pair with or connect to it.
‘Bluetooth pairing’ occurs when two Bluetooth enabled devices agree to establish
a connection and communicate with each other.
The Bluetooth connected LED on the panel will blink fast with short intervals
when it is discoverable or when it is trying to connect to a previously paired
Bluetooth device. When a device is paired with and connects to the radio, the
blue Bluetooth connected LED will blink slow with long intervals.
Bluetooth connectivity performance may vary depending on the connected Bluetooth
devices. Please refer to the Bluetooth capabilities of your device before connecting
to your Powerplayer. All features may not be supported on some paired Bluetooth
devices.
A Bluetooth connection can provide a link for audio up to a distance of approximately ten
metres. When pairing two Bluetooth enabled devices, for convenience, we recommend
they should be no more than 2 to 3 metres apart. The presence of other functioning
Bluetoothdevicesduringconnectionmayleadtooperationaldifculties.
15 16
GB
GB
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PerfectPro PP800L - Powerplayer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro PP800L - Powerplayer in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info