742377

PerfectPro PP800L - Powerplayer Manual

9
Zoom out
Zoom in
Previous page
1/65
Next page
4. When a DAB signal is found, the display will show its signal strength. Any new radio
stations found will be added to the list stored in the radio.
5. Press the Tuning / Select knob to return to normal DAB service.
Dynamic Range Control (DRC) settings
DRC can make quieter sounds easier to hear when the radio is used in a noisy
environment.
1. In DAB mode, press the Menu button, the display shows “Manual tune”.
2. Rotate the Tuning / Select knob until the display shows “DRC”. Press the Tuning /
Select knob.
3. Rotate the Tuning / Select knob to select required DRC setting (default is Off).
DRC off DRC is switched off. Broadcast DRC will be ignored.
DRC high DRC is set to high as sent by broadcaster.
DRC low DRC level is set to low that sent by broadcaster.
4. Press the Tuning / Select knobtoconrmthesetting.Thedisplaywillreturnto
normal radio display.
Note: Not all DAB broadcasts use the DRC function. If the broadcast does not provide
DRC information, the DRC setting in the radio will have no effect.
Prune stations
If you move to a different part of the country, some of the stations which were listed
may no longer be available. Also, from time to time, some DAB services may stop
broadcasting, or may change location or frequency. The Prune stations function will
delete the unavailable DAB stations from your station list.
1. In DAB mode, press the Menu button, the display shows “Manual tune”.
2. Rotate the Tuning / Select knob until the display shows “Prune”.
3. Press the Tuning / Select knob to enter the setting.
4. Rotate the Tuning / Select knob to select between “Yes” or “No” (default is No).
Select “Yes” to enable this function if required, otherwise, select “No”.
5. Press the Tuning / Select knobtoconrmyoursetting.Thedisplaywillreturnto
normal radio display.
Note: If you have moved the radio to a different part of the country, you should also carry
out a search for new stations (please see the section “Finding new stations – DAB”).
FM MODE
Operating the radio
1. Press the Power button to turn on the radio.
2. Select the FM waveband by pressing the Source button.
3. IfthisisthersttimetoswitchtoFMmode,thestationinpreset1willbeplayed.
If the radio has been used before, the last listened station will be played.
4. To seek station, press the Tuning / Select knob. The scan stops automatically
whenitndsastationofsufcientstrength.
5. After a few seconds, the display will update and show station name if RDS
information is being received.
6. Tondotherstations,presstheTuning / Select knob again.
7. To seek station in an opposite direction, rotate the Tuning / Select knob clockwise
(to scan from low frequency to high frequency) or rotate anti-clockwise (to scan
from high frequency to low frequency), and press the Tuning / Select knob.
8. When the waveband end is reached, the radio will recommence tuning from the
opposite waveband end.
Manual tuning
1. Press the Power button to turn on the radio.
2. Select the FM band by pressing the Source button.
3. Rotate the Tuning / Select knob to reach the required FM station.
The radio will change the frequency in steps of 50 kHz.
4. Rotate the rubber antenna to get the best reception. If the radio is tuned to a station
ofsufcientsignalstrengthwithRDSinformationpresent,thedisplaymaychange
to show the station name.
5. When the waveband end is reached, the radio will recommence tuning from the
opposite waveband end.
RDS station service
RDS (Radio Data System) is an information system which inaudible digital information
is transmitted in addition to the normal FM radio program. When the radio is receiving a
RDSstationandthereceptionstrengthissufcient,thestationnamewillappearinthe
display. It may take some time before the RDS information is available.
13 14
GB
GB
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PerfectPro PP800L - Powerplayer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro PP800L - Powerplayer in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info