742386
12
Zoom out
Zoom in
Previous page
1/56
Next page
TONE
The
Tone
function enables the user to adjust the lower and higher sound frequencies.
1. Press the
On/Off button
to turn on the radio.
2. Press and hold the
Volume
knob for about 3 seconds, the display shows “BASS 0”.
3. Rotate the
Volume knob
to set the desire Bass level.
4. Press the
Volume knob
toconrm,thedisplayshows“TREBLE0”.
5. Rotate the
Volume knob
to set the desire Treble level.
6. Press the
Volume knob
toconrmandreturntonormaldisplay,
ADDITIONAL METAL TELESCOPIC ANTENNA
You can use this as an alternative antenna for your radio in areas or locations where the
radiosignal(FM/DAB/DAB+)isweaktoveryweak.
ATTENTION: The standard antenna on the radio is exible. The metal antenna
is not exible or bendable and should be used with care. Breaking or bending
antennas is not covered by warranty.
Installing:Carefullyscrewoffthestandardexibleantenna.Firstcarefullyloosenthe
antennawithanopen-end-wrench(size14)–turncounterclockwise.
Carefully screw on the metal telescopic antenna and softly tighten it with an open-end
wrenchkey(size14)–turnclockwise.
ATTENTION: do not use too much force when xing the antennas as this can
damage the screw threat of the antennas or make it break off.
LANGUAGE SETTING
Themenuoftheradiocanbeconguredtovariouslanguages.
1. Press the
On/Off button
to turn on the radio.
2. Press the
Menu button
, and then rotate the
Tuning knob
until the display shows
“System”.
3. Press the
Tuning knob
; rotate the
Tuning knob
until the display shows “Language”.
4. Press the
Tuning knob
to enter the language adjustment menu.
5. Rotate the
Tuning knob
until the desired language appears on the display (default
isEnglish).
6. Press the
Tuning knob
toconrmyourchoice.Thedisplaymenuwillchangetothe
chosen language.
20
GB
GB
MANUALLY SETTING CLOCK
The clock can only be manually set when the radio is in standby mode. If no buttons are
pressed for 5 seconds, the radio will exit the clock setup and the setting is cancelled.
1. Press and hold the
Time Set knob
for12secondsuntilthehourdigitsashonthe
display.
2. Rotate the
Time Set knob
to set the hour.
3. Press the
Time Set knob
toconrm,theminutedigitsash.
4. Rotate the
Time Set knob
to set the minute.
5. Press the
Time Set knob
toconrm,thedayashesonthedisplay.
6. Rotate the
Time Set knob
to set the current day.
7. Press the
Time Set knob
toconrm,themonthashes.
8. Rotate the
Time Set knob
to set the current month.
9. Press the
Time Set knob
toconrm,theyearwillthenashonthedisplay.
10. Rotate the
Time Set knob
to set the current year.
11. Press the
Time Set knob
toconrm,“SYNCLOCKON”ashes.
12. Rotary the
Time Set knob
to select “SYNCLOCK ON” or “SYNCLOCK OFF”.
13. Press the
Time Set knob
toconrmandnishtheclocksetting.
RDS time synchronisation
If “SYNCLOCK ON” is selected, the symbol “ ” will show on the clock display. Some
RDS stations transmit a time signal. If reception is good and you have selected the
“SYNCLOCK ON” option during the time setting, the time will be automatically updated
(“ ashesonthedisplay).Timesynchronizationcantakeseveralminutes.The
automatic time setting is always activated when the radio is switched from standby to
FM broadcasting and receives a RDS station.
LOUDNESS
The
Loudness
function enables to get compensation on lower and higher frequency.
The effect will be more audible when the radio is on a lower volume level (Dynamic
Loudness).
1. Press the
On/Off button
to turn on the radio.
2. Press the
Menu button
, and then rotate the
Tuning knob
until the display shows
“System”.
3. Press the
Tuning knob
; rotate the
Tuning knob
until the display shows “Loudness”.
4. Rotate the
Tuning knob
to select between “Loudness On” or “Loudness Off”. Press
the
Tuning knob
toconrmthesettingandreturntonormaldisplay.
19
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PerfectPro HF2U - Handsfree 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro HF2U - Handsfree 2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info