742386

PerfectPro HF2U - Handsfree 2 Manual

10
Zoom out
Zoom in
Previous page
1/56
Next page
Bluetooth Options
The Bluetooth function can be set to operate in different ways as below:
1. In Bluetooth mode, press the
Menu button to enter the system setting.
2. Rotate the
Tuning knob until “Bluetooth” is displayed; press the Tuning knob.
3. Rotate the
Tuning knob
to select “BT always on”, “BT mode only” or “Disconnect
BT” options, and press the
Tuning knob to select the setting.
a. BT always on Bluetooth is turned on when the Handsfree radio is on. You
can playback music in the Bluetooth mode and use the
Hands-Free-Calling feature to answer incoming phone calls
in all operation modes, for example, also when you are
listening to the radio. As an indication, the blue
Bluetooth
connected LED
will be on in all operation modes (FM, DAB,
BluetoothandAUXIN).
b. BT mode only Bluetooth is turned on only in Bluetooth mode. You can
playback music and use the Hands-Free-Calling feature to
answer incoming phone calls in the Bluetooth mode only.
As an indication, the blue
Bluetooth connected LED
will be
on only in the Bluetooth mode.
c. Disconnect BT Bluetooth will be disconnected from your mobile phone
and enter the “discoverable mode” (The blue
Bluetooth
connected LED
will start blinking until a new pairing is
established).ThisistoallowtheBluetoothpairingtoanother
device. If no new device is paired, the Bluetooth will
automatically try to connect to the last device when it is
switched off and on again.
Note:Thevolumesettingsofyourmobilephoneinuencethevolumeofthemusic
streaming and the volume of the incoming phone calls on the Handsfree radio.
The Auto-Power management function will be activated in Bluetooth mode. If there is
no signal from Bluetooth for a period of over 15 minutes, the Handsfree 2 radio will
automatically switch to standby mode. Pressing the On/Off button will wake up the unit.
Bluetooth LED conguration
1. Press the
On/Off button to turn on the radio.
2. Press the
Menu button, and then rotate the Tuning knob
until the display shows
“System”.
3. Press the
Tuning knob; rotate the Tuning knob
until the display shows “Bluetooth
LED”.
4. Press the
Tuning knob to enter the Bluetooth LED adjustment menu.
5. Rotate the
Tuning knob
toselect“on”(bydefault)inordertokeepBluetoothLED
lightened when connected;
6. Or rotate the
Tuning knob
to select “off” to turn off Bluetooth LED when Bluetooth
connection has been established.
7. Press the
Tuning knob
toconrmyourchoice.
15
USB MODE
CONDITIONS TO PREVENT MOIST FROM ENTERING THE RADIO!! KEEP THE
RUBBER COVER CLOSED UNDER THESE CONDITIONS.
USB memory devices can be used with the radio for playback of MP3, AAC, FLAC and
WAVles.
The radio has been tested with a range of USB memory devices up to 32GB. However,
there are many different USB memory device variants available and not all of them can
beguaranteedtoworkinthisradio.MemorymustusetheFATorFAT32lingsystemin
order to operate in this radio.
Audio formats supported for playback are MP3, AAC, FLAC and WAV. Playback does
notsupportlesthathaveDRMprotection.
The USB socket are located on the side behind the rubber cover. Make sure the rubber
cover is closed well after use to prevent moist and dirt from entering the radio.
The USB memory device should not be removed during playback as damage or
corruptionoflesmayoccur.
USB memory devices are not included with this radio.
Note: When the radio is playing a USB stick, due to additional power consumption
of this, the charging of the batteries will stop in order to maintain normal functioning
and quality of the USB playback. Once the USB stick is removed normal charging will
continue.
Insert and remove a USB memory device
Carefully insert a USB memory device into the USB socket.
To remove the USB memory device, simply pull the device out.
Playing music les
1. Press the
On/Off button to turn on the radio.
2. Press the
Source button to select the USB.
The display shows “READING”. It may take some time before the radio has read in
thefoldersandlesdataonthememorydevice.
3. AfterreadingtheUSBmemorydevice,theradiowillstarttoplaytherstle(song)
intherstfolder.
If no USB memory device is inserted, the display will show “NO USB STICK”
respectively.
4. To pause the playback, press the
Play/Pause button.
Press the
Play/Pause button again to resume the playback from pause position.
5. Toskiptothenextle,pressthe
Fast Forward button.
6. Toskiptothepreviousle,pressthe
Rewind button
7. Whiletheleisplaying,pressandholddowneitherthe
Fast Forward button
or
Rewind button
.Releasethebuttonwhenthedesiredpartoftheleisreached.
8. To skip to the next folder, presses the
Folder + button.
9. To skip to the previous folder, presses the
Folder + button.
16
GB
GB
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PerfectPro HF2U - Handsfree 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro HF2U - Handsfree 2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info