742384

PerfectPro Bull1 - Rockbull Manual

9
Zoom out
Zoom in
Previous page
1/40
Next page
13 14
GB
GB
2. Press the EQUALIZER button repeatedly to select the desired EQ. The displayed
EQ will be effective immediately:
EQ1 Neutral
EQ2 Indoor
EQ3 Outdoor
EQ4 Flat
EQ5 Rock
EQ6 Soul and Jazz
EQ7 Classical
EQ8 Acoustic
EQ9 Dance
EQ10 Spoken word
EQ11 Small room
EQ12 Late night
3. The display will return to normal in 3 seconds, and resume operation.
ADDITIONAL METAL TELESCOPIC ANTENNA
You can use this as an alternative antenna for your radio in areas or locations where the
radiosignal(FM/DAB/DAB+)isweaktoveryweak.
ATTENTION: The standard antenna on the radio is exible. The metal antenna
is not exible or bendable and should be used with care. Breaking or bending
antennas is not covered by warranty.
Installing:Carefullyscrewoffthestandardexibleantenna.Firstcarefullyloosenthe
antennawithanopen-end-wrench(size14)–turncounteranti-clockwise.
Carefully screw on the metal telescopic antenna and softly tighten it with an open-end
wrenchkey(size14)–turnclockwise.
ATTENTION: do not use too much force when xing the antennas as this can
damage the screw threat of the antennas or make it break off.
LANGUAGE SETTING
Themenuoftheradiocanbeconguredtovariouslanguages.
1. Press the On/Off button to switch on the radio.
2. Press the MENU button, and then rotate the TUNING knob until the display shows
“System”.
3. Press the TUNING knob; rotate the TUNING knob until the display shows
“Language”.
4. Press the TUNING knob b to enter the language adjustment menu.
5. Rotate the TUNING knob until the desired language appears on the display (default
isEnglish).
6. Press the TUNINGknobtoconrmyourchoice.
7. The display menu will then change to the chosen language.
SOFTWARE VERSION
The software display cannot be altered and is just for your reference. You can only view
the software version in DAB and FM modes.
1. Press the On/Off button to switch on the radio.
2. Press the SOURCE button to select FM or DAB mode.
3. Press the MENU button and then rotate the TUNING knob until the display shows
“System”.
4. Press the TUNING knob; rotate the TUNING knob until the display shows “SW
version”.
5. Press the TUNING knob to view the software version.
6. Press the MENU button to return to the normal radio display.
SYSTEM RESET
If the radio fails to operate correctly, or some digits on the display are missing or
incomplete, carry out the following procedure.
1. Press the On/Off button to switch on the radio.
2. Press the MENU button.
3. Rotate the TUNING knob until the display shows “System”. Press the TUNING
knob.
4. Rotate the TUNING knob until the display shows “Factory Reset”. Press the
TUNING knob.
5. Rotate the TUNING knob to select between “Yes” or “No”. Select “Yes” if you wish to
reset the radio, otherwise, select “No”.
6. Press the TUNINGknobtoconrmyourchoice.
7. A full reset will be performed. All presets and the station list will be erased. All
settings will be set to the default values. The radio will start up and the display
will show “WELCOME TO DIGITAL RADIO” for a few seconds. Then the radio will
automatically perform an auto scan of the Band III DAB channels and the FM band.
The display will show “Scanning” in DAB and “Auto” in FM.
8. When the scan is completed, the 10 strongest FM stations will be stored as presets.
The radio will switch to standby with the updated clock and date showing on the
display.
In case of malfunction due to electrostatic discharge; reset the product as above to
resume normal operation. If you are not able to perform the reset operation as above,
reconnect the power supply.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PerfectPro Bull1 - Rockbull at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro Bull1 - Rockbull in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info