Manual Perel TC84100N (page 5 of 33) (English, German, Dutch, French, Polish, Portuguese, Spanish)

720279

Zoom out

Zoom in

1/33

TC84100N

V. 03 – 23/04/2018 5 ©Velleman nv

6.2 Taking Care of the Wick

With use, a tar-like substance may be deposited on the top of the wick. The glass fibre wick does not need to

be cut. To remove this substance, burn the wick idle as follows:

1. Do not fill the tank with lighting kerosene.

2. Light the wick and let it burn until the flame dies. By this time, the tar-like substance will have been

consumed.

Do this every time you feel the wick does not suck up enough lighting kerosene.

6.3 Exchanging Wicks

1. Loosen the three fixing nuts and remove the

guard frame. Remove the chimney.

2. Loosen the four fixing nuts and remove the

wick cover. Make sure not to lose the packing.

3. Loosen the nut for the wick adjusting handle

by turning it to the left. Pull the wick adjusting

handle towards you.

4. Pull up the wick holder together with the wick.

Remove the old wick from the wick holder.

Clean the wick guide, burner cover, etc.

5. Insert a new wick inside the wick holder and

fix it with the hooks on the inside of the wick

holder. Make sure to expose an even amount

of wick on both sides of the wick holder. Slide

the wick holder over the wick guide.

6. Get the wick holder in gear with the tip of the

wick adjusting handle. Turn the wick adjusting

handle to the right and lift the wick fully.

Make sure not to fasten too tightly. If the top

of the wick is not evenly exposed, even out

with a scissor. Put the wick cover on the

burner. Make sure the gap between the wick

cover and the wick guide is even. Test the

heater before actually using it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Perel TC84100N in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Perel TC84100N Manual

Product: