493727
9
Zoom out
Zoom in
Previous page
1/64
Next page
CBP1_v2 PEREL 9
15. How to Use the Unit’s Memory
The measured blood pressure and pulse rate readings are automatically stored in the unit’s
memory. The memory can store up to 128 measurement sets. When full, the oldest readings are
overwritten.
1. Press M to call a previously memorized reading. The number of memorized sets will first
appear. Next, the systolic and diastolic blood pressure, the pulse rate and the date/time will be
displayed in the LCD.
2. Press M to switch between the different sets. The unit will automatically switch off after
approximately 3 minutes or press to switch off.
16. Erasing the Memory
1. Make sure the unit is switched off.
2. Hold M pressed for 3 seconds to clear all the memorized sets. The number 0 will appear on
the LCD to indicate all sets have been cleared.
17. Maintenance
Storage
Always store the unit in its original package.
Remove the batteries when the unit is not in use.
The accuracy of the cuff-pressure transducers/indicators need to be verified at intervals of one
year.
Cleaning
Never use an alcoholic-base or solvent agent to clean the device.
Wipe the device off with a cloth moistened with tap water or a mild cleaning agent. Dry off with
a soft and dry cloth.
Clean any dirt on the cuff with a moistened cloth and some soap.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Perel CBP1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Perel CBP1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info