Manual Perel CBP1 (page 8 of 64) (English, German, Dutch, French, Portuguese, Spanish)

493727

Zoom out

Zoom in

1/64

CBP1_v2 PEREL 8

1. Hold your left arm in front of you with your palm facing upwards. Apply the cuff so that the

monitor is on the inside of your wrist.

2. Place the edge of the cuff at approximately ¼”~½” (0.5~1.5cm) of the palm.

3. Wrap the cuff comfortably around the wrist. The top and bottom edges of the cuff should be

tightened evenly around the wrist.

4. When the cuff is positioned correctly, secure by pressing both bands firmly together.

13. Correct Measuring Position

It is extremely important, in order to obtain correct values that the

cuff be at the same level of the heart. A higher or deeper position

may give deviations from the true value.

1. Place your elbow on the table. Make sure the cuff is at the same

level as the heart.

2. Relax your hand with the palm facing up.

14. How to take Measurements

1. Press the button. The unit will start to inflate the cuff after the initial test procedure. The 0

number will appear on the LCD.

Simply press the button to take the reading if the unit is already switched on.

2. The cuff inflates to approximately 160mmHg (approximately 40mmHg higher than the average

systolic blood pressure reading). The increasing symbol ↑ appears on the LCD.

3. As soon as the cuff reaches the required inflation level, it begins to deflate automatically. As

the cuff deflates, the decreasing symbol ↓ appears on the LCD. The heart symbol flashes.

4. The cuff is deflated as soon as the measurement is complete. The heart symbol stops

flashing and your blood pressure and pulse will be displayed on the LCD for two minutes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Perel CBP1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Perel CBP1 Manual

Product: