492085

Perel 4605 Manual

2
Zoom out
Zoom in
Previous page
1/15
Next page
4605-B PEREL
2
3. Additional Safety Instructions
1. The distance between the spark guard and the grinding wheel must not exceed 2mm.
2. The distance between the workpiece support and the grinding stone must not exceed 2mm.
3. Never use damaged grinding wheels.
4. Replace the grinding wheel when the wheel has worn by 40mm.
MOUNTING THE MACHINE
The machine must be screwed to a workbench. Mark the position of the mounting holes on the workbench. Drill holes
at each of the marked positions, adjusting the diameter and depth of the holes to the screws used. Place the
machine on the workbench and insert the screws into the mounting holes. Tighten the screws.
REPLACING A GRINDING WHEEL
Always unplug the grinder before replacing a grinding wheel. Never use a cracked grinding wheel. Replace a cracked
grinding wheel immediately. A cracked grinding wheel may break into pieces when used and cause injuries.
MOUNTING AND ADJUSTING THE SPARK GUARDS
Adjust the position of the spark guards frequently to compensate for the wear of the grinding wheels. Mount the spark
guard on the wheel guard with the screw. Keep the distance between the spark guard and the grinding wheel as
small as possible (max. 2mm). Tighten the spark guard screw and lower the screen. Tighten the nut.
ADJUSTING THE WORKPIECE SUPPORTS
Adjust the position of the workpiece supports frequently to compensate for the wear of the grinding wheels. Loosen
the adjusting screw. Keep the distance between the workpiece support and the grinding wheel as small as possible
(max. 2mm). Tighten the adjusting screw.
4. Description
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Perel 4605 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Perel 4605 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info