PENTAGRAM horNet Wi-Fi USB (P 6132-10)
Wireless Network Properties Window
This window allows you to configure created network properties.
General options
Profile Name – not available in Access Point Mode.
Network Name(SSID) – enter SSID for created by adapter wireless network. This SSID will be
required in order to connect to this network.
This is a computer-to-computer(ad hoc)… – not available in Access Point Mode.
Channel – channel (frequency) on which wireless network will operate.
Wireless network security frame
This frame contains all Authentication and Encryption settings, required to connect to this
network. Appearance of this frame depends on options selected from Network Authentication
and Data encryption lists.
Authentication – method to authenticate wireless stations:
• Open System – with this method, every wireless station can request authentication. If open
network uses WEP encryption, you may need to input WEP key in order to connect to this
network.
• Shared – with this authentication, the station requesting authentication must provide a
secret WEP key (which can be obtained from the network administrator) using a secure
channel (independent of the 802.11 wireless communications channel).
• WPA PSK and WPA2 PSK – station requesting authentication must provide a WPA Preshared
Key. AES or TKIP are used for encryption.
Data encryption – data encryption algorithm used by wireless network:
17