523543

PENTAGRAM Cerberus P 6341 Manual

9
Zoom out
Zoom in
Previous page
1/84
Next page
PENTAGRAM Cerberus P 6341
9
Default Settings
Before changing configuration familiarize yourself with these default settings.
IP Address 192.168.1.100
Subnet Mask 255. 255. 255.0
SSID PENTAGRAM P6341
DHCP Server Enabled
DHCP Server IP Address Pool
100 IP addresses
from 192.168.1.101
IP Address Lease Time 43200 seconds (12 hours)
User Name admin
Password pentagram
It is recommended to change username and/or password as soon as possible.
If you ever forget the password to log in, you may need to reset router to restore the factory
default settings. This procedure is described below.
Resetting router
• Turn router on and wait about 2 minutes for router initialization.
• Press RESET button using the end of paper clip or other small pointed object and release
it after 6 seconds to reset the router and to restore it to factory default settings. In some
cases, when RESET button was pressed longer than 6 seconds, additional reboot is
necessary.
Connecting Cerberus to Computer.
Cerberus can be connected to computer via Ethernet or WLAN:
Connecting via Ethernet Port (Ethernet Card)
All Ethernet ports of router are made in the technology, which automatically activates
Crossover if necessary. Thanks to autonegotiation of connection speed the router will
automatically select the maximum available speed rate. Transfer at 10/100 Mbit/s rate
requires the category 5 cable wired with RJ-45 connectors. In case of "straight" cable both
connectors must be crimped in standard EIA/TIA 568B. In case of Crossover cable one
connector must be in standard EIA/TIA 56A, and the second in EIA/TIA 568B. After connecting
the device to one of the ports, corresponding LED will begin to blink. That signals the process
of the auto-checking of port and the negotiation of connection speed rate.
Connecting via WLAN Interface (Wireless Card)
To connect PC to Cerberus via WLAN, Wireless Adapter must be properly installed and
configured and both router and PC must be in the same subnet.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus P 6341 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus P 6341 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info