523546
51
Zoom out
Zoom in
Previous page
1/75
Next page
Cerberus ADSL2+ Wi-Fi (P 6331-5)
51
Protocol The selections are TCP, UDP, ICMP, Specify, and none. If you choose Specify,
you need to enter the protocol number in the box next to the Protocol field. This field cannot be
configured alone, additional fields like IP, Source MAC, and/or Ingress Interface should be
configured. This field is also required if the source port or destination port has been entered.
Source Port The source protocol port. You cannot configure this field without entering the
protocol first.
Destination Port – The destination protocol port or port range. You cannot configure this field
without entering the protocol first.
Source MAC – The MAC address of the traffic source.
Local Routing Mark This field is enabled only when Locally Generated is selected in the
Ingress Interface field. The mark for DNS traffic generated by different applications are
described below:
Dynamic DNS: 0xE1
Dynamic Proxy: 0xE2
Web Server: 0xE3
MSNTP: 0xE4
DHCP Server: 0xE5
IP tables Utility: 0xE6
PPP Deamon: 0xE7
IP Route: 0xE8
ATM Library: 0xE9
NET Tools: 0xEA
RIP: 0xEB
RIP v2: 0xEC
UPNP: 0xEE
Busybox Utility: 0xEF
Configuration Manager: 0xF0
DropBear Utility: 0xF1
Voice: 0
Currently routing algorithms make decision based on destination address, i.e. only Destination
IP address and subnet mask is supported. The Policy Routing page enables you to route
packets on the basis of various fields in the packet.
The following fields can be configured for Policy Routing:
Destination IP address/mask
Source IP address/mask
Source MAC address
Protocol (TCP, UDP, ICMP, etc)
Source port
Destination port
Incoming interface
DSCP
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus P 6331-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus P 6331-5 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info