523546

PENTAGRAM Cerberus P 6331-5 Manual

73
Zoom out
Zoom in
Previous page
1/75
Next page
Cerberus ADSL2+ Wi-Fi (P 6331-5)
73
Troubleshooting
If the router is not function properly, first check this session for simple troubleshooting before
contacting your Internet service provider (ISP) for support.
Using LEDs to Diagnose Problems
The LEDs are useful aides for finding possible problem causes.
Power LED
The POWER LED on the front panel does not light up.:
1. Make sure that the power adaptor is connected to the router and plugged in to an
appropriate power source. Use only the supplied power adaptor;
2. Check that the router and the power source are both turned on and the router is receiving
sufficient power;
3. Turn the router off and on;
4. If the error persists, you may have a hardware problem. In this case, you should contact
your vendor.
LAN LED
The LAN LED on the front panel does not light up.:
1. Check the Ethernet cable connections between your router and the computer or hub;
2. Check for faulty Ethernet cables;
3. Make sure your computer’s Ethernet card is working properly;
4. If these steps fail to correct the problem, contact your local distributor for assistance.
ADSL LED
The ADSL LED on the front panel does not light up:
1. Check the telephone wire and connections between the router ADSL port and the wall
jack;
2. Make sure that the telephone company has checked your phone line and set it up for
ADSL service;
3. Reset your ADSL line to reinitialize your link to the DSLAM;
4. If these steps fail to correct the problem, contact your local distributor for assistance.
Problems with the Web Interface
I cannot access the web Interface:
1. Make sure you are using the correct IP address of the router. Check the IP address of the
router;
2. Make sure that there is not a console session running;
3. Check that you have enabled web service access. If you have configured a secured client
IP address, your computer’s IP address must match it. Refer to the chapter on remote
management for details;
4. For WAN access, you must configure remote management to allow server access from
the WAN (or all);
… 73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus P 6331-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus P 6331-5 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info