Manual PENTAGRAM Cerberus P 6331-5 (page 22 of 75) (English)

523546

Zoom out

Zoom in

1/75

Cerberus ADSL2+ Wi-Fi (P 6331-5)

Domain – The domain name is used in conjunction with the host name to uniquely identify the

router. To access the web pages of the router you can type 192.168.1.1 (the IP address) or

mygateway1.ar7 (Host Name.Domain).

Enable DHCP Server – Enables/disables DHCP. By default, your router has the DHCP server

(LAN side) enabled. If you already have a DHCP server running on your network, you must

disable one of the two DHCP servers.

Assign ISPDNS, SNTP – If enabled the router will advertise its own IP address as the DNS

server, when disabled the router will provide the DNS that was received from the WAN.

Start IP / End IP – Enter the starting/ending IP address which will be assigned to devices

using DHCP

Lease Time – The Lease Time is the amount of time that a network user is allowed to

maintain a network connection to the router using the current dynamic IP address. At the end

of the Lease Time, the lease is either renewed or the DHCP server issues a new IP. The

amount of time is in units of seconds. The default value is 3600 seconds (1 hour). The

maximum value is 999999 seconds (About 278 hours).

Enable DHCP Relay – In addition to the DHCP server feature, the router supports the DHCP

relay function. When the router is configured as DHCP server, it assigns the IP addresses to

the LAN clients. When the gateway is configured as DHCP relay, it is responsible for

forwarding the requests and responses negotiated between the DHCP clients and the server.

Relay IP – The IP address of the DHCP relay server.

Server and Relay Off – When the DHCP server and relay functions are turned off, the

network administrator must carefully configure the IP address, Subnet Mask, and DNS

settings of every host on your network. Do not assign the same IP address to more than one

host. Also, your router must reside on the same subnet as all the other hosts.

Diagnostics

Diagnostic Test is used for investigating whether the router is properly connected to the WAN

Network. This test may take a few seconds to complete. Before running this test, make sure

you have a valid DSL link.

To perform the test, select your connection from the list and press the Test button. You can

also perform “Ping” Test or “Full Modem” Test:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus P 6331-5 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

PENTAGRAM Cerberus P 6331-5 Manual

Product: