523550

PENTAGRAM Cerberus P 6311-72 Manual

52
Zoom out
Zoom in
Previous page
1/54
Next page
Cerberus P 6311-072
52
4. For WAN access, you must configure remote management to allow server access from
the WAN (or all);
5. Your computer’s and the router’s IP addresses must be on the same subnet for LAN
access;
6. If you changed the router’s LAN IP address, then enter the new one as the URL;
7. Remove any filters in LAN or WAN that block web service.
The web Interface does not display properly:
1. Make sure you are using Internet Explorer 5.0 (or compatible) and later versions;
2. Delete the temporary web files and log in again.
Problems with the Login Username and Password
I forgot my login username and/or password:
1. The default username is “admin”. The default password is “trendchip”. The Password
and Username fields are case-sensitive. Make sure that you enter the correct password
and username using the proper casing;
2. Press the DEFAULT button for five seconds, and then release it. When the ADSL LED
begins to blink, the defaults have been restored and the router restarts;
Problems with LAN Interface
I cannot access the router from the LAN or ping any computer on the LAN:
1. Check the Ethernet LEDs on the front panel. A LAN LED should be on for a port that has
a PC connected. If it is off, check the cables between your router and the PC. Make sure
you have uninstalled any software firewall for troubleshooting;
2. Make sure that the IP address and the subnet mask is consistent between the router and
the workstation.
Problems with WAN Interface
Initialization of the ADSL connection failed:
1. Check the cable connections between the ADSL port and the wall jack. The ADSL LED
on the front panel of the router should be on;
2. Check that your VPI, VCI, type of encapsulation and type of multiplexing settings are the
same as what you collected from your telephone company and ISP;
3. Restart the router. If you still have problems, you may need to verify your VPI, VCI, type
of encapsulation and type of multiplexing settings with the telephone company and ISP.
I cannot get a WAN IP address from the ISP:
1. Ensure that all other devices connected to the same telephone line as your router (e.g.
telephones, fax machines, analogue modems) have a line filter connected between them
and the wall socket (unless your are using a Central Splitter or Central Filter installed by
the qualified and licensed electrician), and ensure that all line filters are correctly installed
and right way around;
2. Missing line filters or line filters installed the wrong way around can cause problems with
your ADSL connection, including causing frequent disconnects.
… 52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PENTAGRAM Cerberus P 6311-72 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus P 6311-72 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info