Manual PENTAGRAM Cerberus - P 6367 (page 9 of 48) (English)

523356

Zoom out

Zoom in

1/48

PENTAGRAM Cerberus [P 6367]

Rear Panel

Label Application

USB Connecting 3G modem

NOTE: Connecting power to this socket will cause router damage, which

is not covered by warranty.

LAN/WAN (8P8C) Connecting via network cable (twisted-pair) to:

• local network computer (3G Router or WISP Router mode), or

• ISP's cable/xDSL modem (Wireless Router mode), or

• router-gateway (Wireless AP mode)

POWER Connecting power cable; see Router's power supply section below

Side buttons

WPS/RESET – Press and hold this button for approx. 10 seconds to restore the device to its

factory settings. Press and hold this button for about one second to enter WPS PBC mode. More

detailed information regarding WPS configuration can be found in router's Installation and

Operation Manual.

MODE – Press this button to change router's work mode.

Router's power supply

There are two ways to connect powers supply to the router:

1. Power grid

• connect supplied power adapter to power outlet,

• connect large plug of supplied straight USB cable to power adapter's USB socket,

• connect small plug of the USB cable to router's POWER socket.

2. Computer's USB Port

• connect both large plugs of supplied “Y” USB cable to computer's USB ports,

• connect small plug of the USB cable to router's POWER socket.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of PENTAGRAM Cerberus - P 6367 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

PENTAGRAM Cerberus - P 6367 Manual

Product: