52571
58
Zoom out
Zoom in
Previous page
1/64
Next page
Instructions for use, installation and connection
58
Replacement of parts
The oven light bulb casing is under tension. Danger of
electric shock!
Before replacing the oven bulb switch off the cooker and cut it
from mains by removing the mains power fuse or disconnect
the protective device. Remember that the bulb is regarded as
consumption material and is not covered by the warranty.
Other accessories
Oven grid, biscuit tray, etc. may be ordered from the service
center. When ordering please quote the code and the type or
model of the appliance.
Hotplate control knobs are removed by pulling them outwards
and replaced by pushing the new ones back in place.
Oven light bulb
The bulb for replacement
should meet the following
specifications:
E 14, 230 V, 15 W, 300°C.
Unscrew the glass
cover by turning it counter
clockwise, and replace the
bulb. Screw the glass cover
back in place.
The side light bulb glass cover
may be removed by inserting
the screwdriver into the slot and
pull in the direction of the arrow
(see Fig.).
Remember that the bulb is
regarded as consumption
material and is not covered
by the warranty.
Instructions for installation and connection
Safety precautions for the technician
Installation may be carried out only by qualified personnel.
The electric installation shall be equipped with a safety
device, able to disconnect the appliance from mains in all
wires, with the distance between contacts of not less than 3
mm in open position. Good protection is provided by the LS-
switches and/or fuses.
The connection may be carried out by rubber mains lead
(type HO5RR-F with green/yellow earth wire), PVC insulated
mains lead (type HO5VV-F with green/yellow earth wire) or
other cables of equal or better quality.
Distance between the cooktop and the kitchen hood must be
at least the distance, indicated in the instructions for use of
the kitchen extraction hood.
Panels, glue and furniture lining from artificial materials,
adjacent to the appliance must be temperature resistant
(>90°C), otherwise they might be deformed.
Mains lead behind the cooker must be placed in such
manner to avoid touching the back panel of the cooker
because of the heat it develops during operation.
Remove any packaging materials (foils, artificial foam, nails,
etc.) from the reach of children, because they represent
potential danger. Children may swallow small parts, or
suffocate with foils.
Leveling the appliance
The height of the cooker is 85 cm. Left and right side of the
support is equipped with two wheels to facilitate relocation. In
the front part, on both sides there are two adjustable screws,
used to level the cooker and adjust its upper edge in line with
the adjacent kitchen furniture. Some cookers are equipped with
four adjusting screws (two in front and two at the back), used
for leveling the appliance or adjusting its heights to match the
adjacent furniture. Adjustable legs are accessible when the
drawer is pulled out. Adjust the position of the cooker by
turning the legs in one direction or another. Adjustable legs will
be turned easier if the appliance is somewhat lifted up and
tilted. In such case relocate the
Electric connection
Open the connection box using the screwdriver, as
shown by the drawing on the cover.
Connection to the mains power can be done only by
the authorized service center or by qualified
personnel!
Wrong connection may damage the parts of appliance and
render your warranty viod!
Connecting voltage of the user’s installation (230 V against N)
must be verified by qualified electrician using the appropriate
tester.
Connector bridges must be positioned in accordance with
the installation connection!
Prior connecting the appliance, check whether the voltage of
the rating plate corresponds to the actual voltage of home
installation.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim PF764 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim PF764 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pelgrim PF764

Pelgrim PF764 User Manual - English, German, Dutch, French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info