USE
12
Your appliance is now hooked up and the correct time is set.
Use the handle to open the door. Put the food in the appliance and close the door.
If the door is not closed properly, the appliance will not function.
If the door is opened during a programme, it is not cancelled, but rather interrupted. To
restart the oven, close the door and press the START button.
If programming is not followed by any action for one minute, the settings are cancelled
and you must reprogram.
Press the START/STOP button when the door is closed to interrupt the programme.
Press and hold the START/STOP button for two seconds to cancel a programme or
turn the selector button to OFF.
Three beeps are sounded to indicate the end of each programme and the time is again
displayed in the display panel.
If the door is left open, the light turns off after 3 minutes.
To eliminate moisture, your appliance is equipped with a delayed ventilation function.
Depending on the cooking method chosen (Solo/Grill/Combined), the oven fan may
continue to run after the programme ends. It will stop automatically.
Comments:
During cooking, neither the temperature nor the power level may be changed.
To change these, a new cooking programme must be entered.
If the door is not opened after the cooking programme, three rapid beeps are repeated each
minute for 10 minutes.
Immediate cooking
To preheat your oven before cooking, select the quick preheat function .
To activate this option:
Press the QUICK PREHEAT button; the clock display
flashes, showing 10 minutes. You may use the selector
button to decrease this time.
Confirm by pressing the START button; the tempera-
ture is displayed (170°C, fixed temperature).
To cancel:
Press and hold the STOP button for a few seconds
Quick preheat function