Manual Pelgrim MAG530 (page 13 of 28) (Dutch)

7446

Zoom out

Zoom in

1/28

USING YOUR MICROWAVE

Cooking/heating with the speedy

cook button

1. Press the speedy cook button, the display

shows “ :30”. By pressing the button

repeatedly in quick succession the time will

increase by 30 seconds at a time. The time

can be set at 5 minutes maximum. After you

release the button the microwave will start

automatically after 1.5 seconds, with the

maximum power.

2. Press the stop/clear button or open the

door to interrupt the programme.

3. Press the speedy cook button again to

restart the programme.

Cooking/heating with automatic

start time

With the auto start you can programme the

oven to switch on automatically at a preset

time. You can not combine the defrosting

function with auto start. Make sure that the

display shows the correct time before you set

the automatic start time.

1. Set the required cooking/heating program

as described before but do not press the

start button. You can programme up to 2

stages.

2. Press the auto start button. On the display

the auto start indicator light will go on and

“:00” will be visible.

3. Turn the time selection button to set the

minutes of the time you wish to set, for

example 30 minutes. The display will show

“:30”.

4. Press the auto start button again.

5. Turn the time selection button to set the

hours of the time you wish to set, for

example 11 hours. The display will show

“11:30”.

6. Press the start button. The display shows

the normal time and the indicator lights for

the functions you programmed go on. The

auto start indicator light and the colon

between the hours and minutes start

flashing. The microwave oven will start at

the preset time. At the end of the

programme three beeps will sound.The

normal time reappears at the display.

If the oven door is opened after an automatic

start time is set, you will have to press the

start button again to let the normal time

reappear in the display. The oven will then

start at the preset time. To check the

automatic start time when the normal time is

visible, you must press the clock button. The

preset time will then be visible for three

seconds.

USING YOUR MICROWAVE

Cooking/heating in 2 stages

In this mode you can program the oven to

operate on two different power levels during

to different cooking times.

1. Press the power selection button. On the

display, the stage 1 indicator light will go on

and “P-HI” will be visible. Select the

required power level for stage 1 by

repeatedly pressing the power selection

button.

2. Turn the time selection button to set the

required cooking time for stage 1. You can

set the cooking time between 10 seconds

and 59 minutes.

3. Press the power selection button again. On

the display, the stage 2 indicator light will

go on and “P-HI” will be visible. Select the

required power level for stage 2 by

repeatedly pressing the power selection

button.

4. Turn the time selection button to set the

required time for stage 2. You can set the

time between 10 seconds and 59 minutes.

5. Press the start button, to start the

microwave oven. The stage 1 indicator light

will flash to indicate that the oven is

operating in stage 1. The display will show

the resulting time of stage 1. At the end of

stage 1 you will hear a signal and the oven

will switch to stage 2. The stage 2 indicator

light will flash. At the end of stage 2 three

beeps will sound.The normal time

reappears at the display.

Defrosting with weight setting

and cooking heating

In this mode you can defrost a meal before

cooking or heating it.

1. Press the auto defrost button. On the

display the weight defrost indicator light

will go on and the light near the “g” symbol

will flash. The display will show “0”.

2. Turn the time selection button to set the

weight of the food that has to be defrosted.

3. Press the power selection button. On the

display, the stage 1 indicator light will go on

and “P-HI” will be visible. Select the

required power level by repeatedly

pressing the power selection button.

4. Turn the time selection button to set the

required cooking/heating time. If you wish

to cook or heat in 2 stages you can repeat

steps 3 and 4 to set the time and the power

level for the second stage.

5. Press the start button, to start the

microwave oven. The weight defrost

indicator light will flash to indicate that the

oven is defrosting. The display will show

the resulting defrosting time. At the end of

the defrosting you will hear a signal and the

oven will start with cooking/heating

according the stages that you programmed.

At the end of stage 2 three beeps will

sound.The normal time reappears at the

display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim MAG530 in the language / languages: Dutch as an attachment in your email.

The manual is 0,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pelgrim MAG530 Manual

Product: