44461

Pelgrim GVW865 Manual

39
Zoom out
Zoom in
Previous page
1/92
Next page
34
The first cycle (see fig. 2a/2b)
■ Turn the tap on fully .
■ Open the door. The control buttons and the
display can now be seen.
■ If no programme has been selected, "PO"
appears on the display.
■ Press the programme selection button. The
last selected programme appears on the
display. Pressing the button repeatedly causes
the other programmes to appear on the display
one after the other (see the programme
selection table on pages 27 and 28).
■ When you press a button, you will hear an
audible signal. If you do not hear an audible
signal, then either the function concerned is
not available or the audible signal has been
switched off (see "Personal preferences").
Close the door and the programme will start
automatically.
End of programme
■ The dishwasher switches itself off
automatically when the programme has
finished. An audible signal indicates when a
programme has finished. "PO" appears on the
display.
■ The dishwasher can be switched off manually
by keeping the programme selection button
pressed for about three seconds until "PO"
appears on the display. Then close the door.
■ Unload the dishwasher. Be careful:
– The kitchenware could be hot.
– Unload the lower basket first. If you unload
the upper basket first, drops of water could
fall on the kitchenware in the lower basket.
Interruption in a running program
■ Open the door carefully, so that there is no
water squirting out of the machine.
■ When the water is already heated up, close
the door completely only after some minutes
resting in leaned position. Add eventually
extra loading. Caution:
– the tablewear inside can be very hot.
Extra programmes (if available)
Delaying the start time
The time at which a programme starts can be
delayed for a minimum of one hour and a
maximum of nine hours.
■ After switching the appliance on, you can set
the start time you want with the button.
The time remaining until the programme
starts is shown on the display. The time
display will disappear if you do not touch a
button for five seconds or if you press
another button. Press the button once to
display the time remaining.
Economy programmes
E button
You can decrease the temperature of
programmes 4 to 8 by means of the E button. This
provides considerable savings in energy
consumption. The duration of the programme is
also shortened.
USE
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim GVW865 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim GVW865 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info