554672

Pelgrim AM 975 Manual

16
Zoom out
Zoom in
Previous page
1/30
Next page
27
26
FOR THE FITTER
Disposal of packaging and
appliances
The packaging of the appliance is recyclable.
It is made up off:
■ cardboard
■ polyethylene
■ CFC free polystyrene (PS rigid foam)
Please dispose of these materials in a
responsible way in accordance with the
regulations of your local authority.
Your local authority will also be able to give
you information about disposing disused
household appliances in a responsible way.
Technical data
Model number AM975
Energy supply 230 V, 50 Hz
Connection 5600 Watt
The identification plate is attached to the base
of the appliance.
The connection cable is of the type Y and may
only be replaced by qualified service
personnel.
This appliance complies with the CE directives.
Faults
Please check the following points which may solve the problem, before calling the service
department.
Sympton
The appliance does not work.
The lights do not light up.
The cooking zones are not
working, the message F0
appears.
The fan switches itself on.
The appliance stops suddenly.
The message F7 appears.
The lamps continue to flash
after switching on.
Appliance is locked.
Fault codes F00 – F08 in the
display.
Cause
No power supply.
Ambient temperature too low
(5 °C) before the hob was
plugged in.
The appliance checks itself
after the loss of power.
Ventilator is not far enough
open.
Transistors overheated.
An unsuitable utensil is being
used.
Poor electrical connection.
Keep on/off button (E)
depressed for 3 seconds.
A control is defective, dirty or
has an object lying on it.
Action
Check the electrical installation
(fuse(s), connection).
After installation, wait about ten
minutes. The messages stop
flashing and you can then use
the appliance.
The fan switches itself off.
Check ventilator openings at
front and back.
Press any button. The message
disappears. Restart at a lower
setting.
Use a suitable utensil.
Check if the cable is being
caught by the drawer. If it is,
have it changed by the installer.
Clean the appliance or have it
repaired. Do not place objects
on the control panel.
FAULTS
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pelgrim AM 975 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pelgrim AM 975 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info