Manual Peg Perego Unico (page 23 of 100) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Turkish, Spanish, Finnish)

769189

Zoom out

Zoom in

1/100

- 23 -

_ WARNING This product is not

suitable for running or skating.

SEAT

_ The Unico SEAT was designed to be

used in combination with the Unico

chassis.

_ WARNING: Always use the

restraint system. Always use the

five-point safety harness.

Always lock the waist strap with the

crotch strap.

_ The front bar has not been

designed to support the child’s

weight; the front bar has not been

designed to lift the seat with the

child’s weight. The front bar does

not replace the seat belt.

_ WARNING: do not use the rain

canopy (if present) in interiors and

check the child is not too hot; do

not leave near sources of heat and

keep away from cigarettes. The

rain canopy must not be used on a

stroller without a hood or parasol it

can attach to. Use the rain canopy

only under adult supervision. Check

the rain canopy does not interfere

with any moving mechanism in the

chassis or stroller. Remove the rain

canopy before folding the chassis or

stroller.

The images referring to the textile details may

differ from the collection purchased.

For more information, consult our website:

www.pegperego.com

INSTRUCTIONS

UNICO CHASSIS

1 OPENING: Before opening the frame, if present, remove

(without using blades) all die-cut cardboard.

WARNING:

_ DO NOT PULL OR FORCE THE FASTENER BEYOND ITS

LIMIT.

_ DO NOT USE THE FASTENER AS A HANDLE BAR FOR

TRANSPORT OR TO CARRY WEIGHTS.

DO NOT HANG BAGS OR OTHER ACCESSORIES ON

THIS ELEMENT.

Press the side fastener downwards, grip the upper ends

of the handle bar and rotate them towards you until the

chassis has opened completely (fig_a). Opened chassis

(fig_b). The chassis is opened correctly when you hear

a click, which corresponds to the handle bar frame

attaching - please look at the picture.

2 FITTING THE WHEELS: slot the rear wheel crosspiece

onto the uprights (fig_a), ensuring that it is facing the

right way, then attach the rear wheels until they click

into place (fig_b) . To assemble the front wheels, fit them

into the slots until they lock into place (fig_c).

3 ATTACHING THE MAIN HANDLE: if the handle tube faces

upwards, align it with the stroller (Fig_a).

Fasten the handle to the frame as shown in the figure

(Fig_b).

To complete the operation, press the two side buttons

on the handle (Fig_c) to ensure the handle pushes in all

the way, until it clicks into place (Fig_d).

4 BASKET: fastening the front part of the basket.

Fasten the basket eyelets to the buttons on each side of

the frame (fig_1).

To complete the basket attachment procedure for the

front part, you are required to insert the supplied tie

(fig_2) as follows:

position it between the basket and buttons, as shown

(fig_3) and use your finger to push downwards, so as to

complete the attachment procedure (fig_(fig_4).

Repeat the same procedure for the other side of the

basket.

5 Fastening the rear part of the basket.

Fasten the upper basket eyelet to the button on each

side of the frame (Fig_5).

Fasten the basket's two lower eyelets to the two buttons

on the rear bar of the frame (Fig_6).

6 FIXED OR SWIVELLING FRONT WHEELS: for fixed wheels,

lift the levers (fig_a); for swivelling wheels, lower the

levers (fig_b). We recommend using fixed wheels on

uneven terrain.

7 BRAKE: Press the lever down to apply the brake on the

chassis and lift it to release the brake.

ADJUSTABLE HANDLEBAR: To adjust the height of the

handlebar, press both of the side buttons at the same

time (fig_a) and swing it into the desired position

(fig_b), then release the buttons.

8 FOLDING: the chassis can be closed without the seat or

with the seat facing the world.

To fold the stroller, it is best to set the front wheels to

their fixed position and close the hood (if fitted). Place

the handle as shown in the figure (fig_a).

Rotate the safety lever to the left (fig_b) and pull the

frame’s internal handle towards you (fig_c). Lift the

handle until the frame is completely folded (fig_d).

9 To fold correctly, make sure the side hook is engaged

(fig_a). When folded, the chassis will stand upright

(fig_b).

TRANSPORT: the stroller can be conveniently carried

(with the front wheels in fixed position) using the central

handle bar (fig_c).

10 All the wheels can be removed to reduce dimensions

further. To remove the back wheels: pull the lever

downwards and remove the wheel as illustrated (fig_a).

To remove the front wheels: press the tab as shown and

remove the wheels (fig_b).

T-MATIC SYSTEM

11 T-Matic System is the quick, practical system that allows

you to attach to the Unico Chassis:

- Unico Seat

- PegPerego Car Seat (through Primo Viaggio LINKS

adapters).

Position them on the T-matic System and press on the

product with both hands until they lock into place.

Check that the child transport element is properly

attached.

SERIAL NUMBERS

12 Unico Chassis, has the information on the product’s

production date on the lower part of the frame.

_ Product name, production date and serial number of

the chassis. This information is essential in the event of a

claim.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Peg Perego Unico in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 4,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Peg Perego Unico Manual

Product: