769174

Peg Perego Elite - carrycot Manual

15
Zoom out
Zoom in
Previous page
1/92
Next page
15
Ganciomatic system
13 Ganciomatic is the quick, practical system that allows
you to attach the Culla Elite to the Ganciomatic clips of a
stroller or the base of a chassis.
To attach the Culla Elite, put it on the stroller or the chassis
and press with both hands until it clicks into place.
Always apply the brakes on the stroller or chassis before
attaching and removing the Culla Elite.
Check that the bassinet unit is properly attached.
• To release it, raise the lever of the Ganciomatic clip
(arrow_a) and lift up the Culla Elite (arrow_b).
Removing the lining
14 REMOVING THE HOOD LINING:
To remove the hood, unbutton the 6 buttons on the lower
edge.
15 Press the buttons on the two attachments and remove the
hood.
16 Remove the flap of fabric from under the handle of the
hood and remove the two rigid supports.
17 REMOVING THE CULLA ELITE INNER LINING:
Raise the backrest (fig_a). This makes it easier to remove
the per mattress (fig_b).
18 Remove the inner lining by opening the two zips on the
edge of the Culla Elite.
19 REMOVING THE CULLA ELITE OUTER LINING:
- Unfasten all the rubber bands as illustrated.
- Remove the outer fabric.
20 WARNING: when replacing the outer lining of the
bassinet, ensure you fit it on correctly with all external
components left on the outside, i.e.:
rings for fastening the vehicle kit (fig_a),
handle for adjusting the backrest (fig_b),
release handles (fig_c).
21 When placing the lining on the hood, ensure you insert the
rigid supports correctly. Insert the tube bearing the carry
handle into the hood’s front slot, ensuring the handle is
centered correctly (fig_a). Pull the flap of fabric out from
the opening on the hood (fig_b) and slide it under the
handle (fig_c).
22 Finally, slip the second metal support into the hood’s inner slot.
23 Fasten the hood to the appropriate supports and fasten
the 6 buttons.
Padding cleaning instructions
Brush the fabric parts to remove dust.
• When washing, closely follow the instructions stated on
the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents and do not tumble dry.
Product cleaning
• This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by adults.
• Keep all moving parts clean and if necessary lubricate
them with light oil.
• Clean the plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device with
solvents or other similar products.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
• Remember to regularly ventilate the interior of the carrycot.
Culla Elite car kit
• Culla Elite can be installed in your vehicle by purchasing
the Culla Elite Car Kit.
• Only the Culla Elite Car Kit should be used to fasten to Culla
Elite to your vehicle securely.
The Original Accessory Peg-Pérego
Peg-Pérego accessories are designed as a useful, practical
means of simplifying the lives of parents. Discover all your
product’s accessories on
www.pegperego.com.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peg Perego Elite - carrycot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peg Perego Elite - carrycot in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info