564335
18
Zoom out
Zoom in
Previous page
1/56
Next page
CS 3000 CS 4000 CS 4080 HZ
Slew Rate
> 15V/us > 15V/us > 15V/us
Damping Factor (8 ohms)
> 500:1 @ 20 Hz - 1
kHz
> 500:1 @ 20 Hz - 1
kHz
> 500:1 @ 20 Hz - 1
kHz
Phase Response
+5 to - 15 degrees from
20 Hz to 20kHz
+5 to - 12 degrees from
20 Hz to 20kHz
+5 to - 12 degrees from
20 Hz to 20kHz
Input Sensitivity
1.6 volts +/- 3% for 1
kHz. 4 ohms rated power,
1.37 volts +/- 3% for 1
kHz. 2 ohms rated power
1.84 volts +/- 3% for 1
kHz. 4 ohms rated power,
1.58 volts +/- 3% for 1
kHz. 2 ohms rated power
2.25 volts +/- 3% for 1
kHz. 4 ohms rated power
Input Impedance
15 k ohms, balanced 15 k ohms, balanced 15 k ohms, balanced
Current Draw @ 1/8 power
1,540 watts @ 2 ohms,
1,000 watts @ 4 ohms,
610 watts @ 8 ohms
1,825 watts @ 2 ohms,
1,185 watts @ 4 ohms,
720 watts @ 8 ohms
1,185 watts @ 4 ohms,
720 watts @ 8 ohms
Current Draw @ 1/3 power
3,650 watts @ 2 ohms,
2,510 watts @ 4 ohms,
1,535 watts @ 8 ohms
4,535 watts @ 2 ohms,
2,975 watts @ 4 ohms,
1,835 watts @ 8 ohms
2,975 watts @ 4 ohms,
1,835 watts @ 8 ohms
Cooling
Two back panel
temperature dependant
variable speed 80 mm DC
fans
Two back panel
temperature dependant
variable speed 80 mm DC
fans
Two back panel
temperature dependant
variable speed 80 mm DC
fans
Controls
2 front panel attenuators,
rear panel Mode switches
2 front panel attenuators,
rear panel Mode switches
2 front panel attenuators,
rear panel Mode switches
Indicator LEDs
2 DDT™ (clip limiting), 2
Signal presence, 2 Active
status
2 DDT™ (clip limiting), 2
Signal presence, 2 Active
status
2 DDT™ (clip limiting), 2
Signal presence, 2 Active
status
Protection
Thermal, DC, turn-on
bursts, subsonic, incorrect
loads
Thermal, DC, turn-on
bursts, subsonic, incorrect
loads
Thermal, DC, turn-on
bursts, subsonic, incorrect
loads
Connectors
Combi XLR & 6.3 mm
phone input, Speakon
®
and Binding Post speaker
output, 15 amp IEC mains
connector
Combi XLR & 6.3 mm
phone input, Speakon
®
and Binding Post speaker
output, 15 amp IEC mains
connector
Combi XLR & 6.3 mm
phone input, Speakon
®
and Binding Post speaker
output, 15 amp IEC mains
connector
Construction
16 ga. steel with cast front
panel and cast handles
14 ga. steel with cast front
panel and cast handles
16 ga. steel with cast front
panel and cast handles
Dimensions
88.9mm x 482.6mm x
376.3mm + 31.8mm
for rear support ears and
connectors (3.5”x19”x
14.81” + 1.25”) + (1.5”)
for handle depth
88.9mm x 482.6mm x
376.3mm + 31.8mm
for rear support ears and
connectors (3.5”x19”x
4.81” + 1.25”) + (1.5”)
for handle depth.
88.9mm x 482.6mm x
376.3mm + 31.8mm
for rear support ears and
connectors (3.5”x19”x
14.81” + 1.25”) + (1.5”)
for handle depth.
Net Weight
18.05 kg (39.8 lbs.) 19.64 kg (43.3 lbs.) 21.45 kg (47.3 lbs.)
Gross Weight
19.23 kg.(42.4 lbs.) 20.8 kg.(45.8 lbs.) 25.4 kg. (56 lbs.)
All power measurements made at 120 VAC, power transformer cold. 4 ohm power is time limited by magnetic circuit breaker.
CS
®
Series SPECIFICATIONS
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peavy CS 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peavy CS 4000 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info