564368
24
Zoom out
Zoom in
Previous page
1/32
Next page

Controls the overall volume level of the amplier.

Adjusts the low-frequency damping factor of the power amplier, which gives the amp a "tighter" sound
when fully dialed counter clockwise and an increasingly "looser" sound when adjusted clockwise.

Adjusts the high frequency damping factor of the power amplier, which gives the amp a "mellow" char-
acter when fully counter-clockwise and more of "biting" or forward character when rotated clockwise.

This switch turns on the high-voltage supply on or off, with up being the ON position. The preamp and DI
will still function when this switch is off.
TIP: Always allow at least 5 minutes of warm-up time before switching the STANDBY switch on. This will
improve performance and reliability of the power tubes.

Turns the unit on or off, with up being the ON position.
Caution: The on/off switch in this unit does not break both sides of the primary mains. Hazardous energy
can be present inside the chassis even when the on/off switch is in the OFF position.

Your AC mains cord plugs in here. The VB-3 has a proprietary universal switch mode power supply that ac-
cepts AC line voltages from 100 VAC to 240 VAC, at 50-60 Hz for correct operation in ANY country with the
proper IEC mains cord/plug.

The mains cord supplied with the unit is a heavy-duty, three-conductor type with a conventional 120 VAC
plug with ground pin. It should be connected to an independent circuit capable of continuously supporting
at least 15 amps. This is particularly critical for sustained high-power applications. If the outlet used does
not have a ground pin, a suitable adapter should be used and the third wire grounded properly. All appara-
tus with class 1 construction shall be connected to a mains socket with a protective earthing connection.
16
2
17
18
19
20

16
17 16 19 20
1
2
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peavey VB-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peavey VB-3 in the language / languages: English as an attachment in your email.

The manual is 4,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info