783293

Peaq PDR360BT Manual

21
Zoom out
Zoom in
Previous page
1/88
Next page
ENGLISH
21
Connections
POWER SUPPLY
Connect the plug with a power socket.
AUDIO IN
You can also listen to external audio devices by
connecting the cable (not included) to the AUDIO-
IN jack.
USB CONNECTION
Playback of music files
You can playback music files which are saved on
an USB stick by plug in the USB stick.
Charging external devices
External devices can be charged via USB port
on the unit. Connect the device to the USB port
(output: 5 V/ 1000 mA).
LAN CONNECTION
Socket of LAN / Ethernet cable connection for
the cable connection of the device with the cable-
connected home network.
HEADPHONE CONNECTION
Connect the headphones to the Headphone jack
of the device.
Attention
Danger! Excessive sound pressure levels from
ear buds and headphones can cause hearing
damage. Listening to loud music for extended
periods of time may lead to hearing impairment.
Keep the volume at reasonable levels.
REMOTE CONTROL - CHANGING BATTERY
Slide the battery compartment cover in the
direction of the arrow and pull it out. Insert the
new battery (CR2032, 3V ) , paying attention
to correct polarity. Slide the battery compartment
cover back on and let it snap into place.
Note
The battery is already inserted. Remove the battery
protection strip before first use.
Operation
TURNING THE UNIT ON
Press the button to switch on the unit.
Note
If you turn on the product for the first time, the
Setup Wizard will call up automatically. Follow the
on screen instructions to make the first time set up.
Setting the display language
Press the MENU button and select System
settings. Then select Language and the desired
language, e.g. English. Press ENTER button to
confirm the setting.
ADJUSTING THE ANTENNA
For optimal FM reception, extend the antenna,
move to fully extend and adjust it.
ADJUSTING THE VOLUME
The volume can be adjusted during playback with
the volume control (Tuning/Info button).
Internet-Radio Configuration
There are two ways to connect the radio to the
internet using an access point:
•Wireless in WLAN-Mode
The WiFi-antenna of the radio receives your DSL
router signals
•With cable using the radio’s LAN connection
in LAN-Mode
Provided an ethernet network is available. Only
use shielded LAN cable.
WLAN-MODE CONFIGURATION
If you have a wireless network, the WLAN mode is
the direct way to connect your radio to the Internet:
1. Simply switch the radio on and, as a cable-
free network client, it automatically searches all
available APs (Access Points).
2. When switching on for the first time, you must
confirm the AP and perhaps enter the key. For
doing so please follow instructions of below
chapters. After that, the radio will always access
this AP. If the AP can no longer be found, it will
be registered accordingly.
IM_PDR360_180629_A_V04_HR.indb 21 29/6/18 5:27 pm
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Peaq PDR360BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Peaq PDR360BT in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 12.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info