731541

PCE instruments PCE-T 390 Manual

11
Zoom out
Zoom in
Previous page
1/15
Next page
Manual
11
2) After setting the upper text to "bASI" or "Euro", pressing the "Enter Button" (4-4) will save the setting
function as default.
Auto power OFF
When the lower display shows "PoFF",
1) use the "▲ Button" (4-5) or the "▼ Button" (4-6) to set the upper value to "yES" or "no".
yES - Auto Power Off enabled
no - Auto Power Off disabled
3) After selecting "yES" or "no", press the "Enter Button" (4-4) to save the default setting.
Switch beeper sound ON/OFF
1) Use the "▲ Button" (4-5) or the "▼ Button" (4-6) to select "yES" or "no".
yES - meter's beep sound will be ON by default
no - meter's beep sound will be OFF by default
3) After selecting "yES" or "no", press the "Enter Button" (4-4) to save the default setting.
Set the temperature unit to °C or °F
When the lower display shows "t-CF",
1) use the "▲ Button" (4-5) or the "▼ Button" (4-6) to select "C" or "F".
C - Temperature unit is °C
F - Temperature unit is °F
2) After the display unit is selected ("C" or "F"), press the "Enter Button" (4-4) to save the default setting.
Set sampling time (seconds)
When the lower display shows "SP-t",
1) use the "▲ Button" (4-5) or the "▼ Button" (4-6) to adjust the value (0, 1, 2, 5, 10, 30,60, 120, 300,
600, 1800,3600 seconds).
Note:
If you set the sampling time to "0 second", it is ready for the manual datalogger function.
2) After the sampling value is selected, press the "Enter Button" (4-4) to save the default setting.
SD memory card format
When the lower display shows "Sd F",
1) use the "▲ Button" (4-5) or the "▼ Button" (4-6) to set the upper value to "yES" or "no".
yES - to format the SD memory card
no - not format the SD memory card
2) If you select "yES", press the "Enter Button" (4-4) once again. The display will show the text "yES Ent".
If you are sure that you wish to format the SD memory card, press the "Enter Button" once. The SD card
will be cleared which means that all data saved on it will be deleted.
9 Power supply from DC adaptor
The meter can also receive its power supply from the DC 9V power adaptor (optional). Insert the plug of
the power adaptor into the "DC 9V Power Adapter Input Socket" (4-13). The meter will permanently be
powered ON when you use the DC ADAPTER power supply (The power button function is disabled).
10 Battery replacement
1) When the left corner of the LCD display shows " ", it is necessary to replace the battery.
However, normally measurements can still be taken for several hours after the low battery indicator
appears before the instrument becomes inaccurate.
2) Loosen the "Battery Cover Screws" (4-15) and remove the "Battery Cover" (4-16) from the instrument
and remove the battery.
3) Replace it with 6 DC 1.5 V batteries (UM3, AA, Alkaline/heavy duty) and put the cover back on.
4) Make sure the battery cover is secured after changing the battery.
11 RS232 PC serial interface
The instrument has an RS232 PC serial interface via a 3.5 mm terminal (4-12).
The data output is a 16-digit stream which can be utilized for the user's specific application.
An RS232 lead with the following connection will be required to link the instrument with the PC.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PCE instruments PCE-T 390 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PCE instruments PCE-T 390 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of PCE instruments PCE-T 390

PCE instruments PCE-T 390 User Manual - German - 14 pages

PCE instruments PCE-T 390 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info