731541

PCE instruments PCE-T 390 Manual

8
Zoom out
Zoom in
Previous page
1/15
Next page
Manual
8
5 Measuring procedure
Type K measurement
1) Power on the meter by pressing the "Power button" (3-2) once.
* When the meter is powered on, pressing the "Power button" once (>2 s) will turn off the meter.
2) The default temperature sensor type of the meter is the K type sensor; the display will indicate "K". The
default temperature unit is °C (°F).
3) Insert the K type K probe into the T1, T2, T3, T4 input socket ( 4-9). The LCD will show the 4 channels
(T1, T2, T3, T4) and the temperature value at the same time.
Type J/T/E/R/S measurement
All the measuring procedures are same as the Type K (section 4-1) except from the selection of the
temperature sensor type. Type J/K/T/E/R/S can be selected by pressing the "Type Button" (4-5) several
times until the LCD display shows the right type.
Pt 100 Ohm measurement
1) All the measuring procedures are same as the Type except from the selection of the temperature
sensor type. "Pt" can be selected by pressing the "Type Button" (4-5) several times until the LCD display
shows "Pt" as follows:
2) Insert the Pt 100 Ohm probe (optional) into the PT1 input socket ( 4-10) PT2 input socket ( 4-11)
* The Pt 100 Ohm measurement only allows max. two channels (two probes ) to be used.
T1-T2 measurement
If two probes are inserted: type K/J/T/E/R/S: use T1, T2 input socket / Pt 100 Ohm: use PT1, PT2 input
socket.
When you press the "T1-T2 button" (4-6), the display will show the difference in temperature
between T1, T2 (PT1, PT2) as follows:
Data Hold
During the measurement, press the " Hold Button" (4-3) once to hold the measured value and the LCD
will display a "HOLD" symbol.
Press the " Hold Button " once again to release the Data Hold function.
Data Record (Max., Min. reading)
1) The data record function records the maximum and minimum readings. Press the "REC Button" (4-4)
once to start the Data Record function and there will be a " REC "symbol on the display.
2) With the "REC" symbol on the display:
a) Press the "REC Button" (4-4) once, the "REC MAX" symbol along with the maximum value will appear
on the display. If you wish to delete the maximum value, just press the "Hold Button" (4-3) once, the
display will show the "REC" symbol only and run the memory function continuously.
b) Press the " REC Button" (4-4) again, the "REC MIN" symbol along with the minimum value will appear
on the display. If you want to delete the minimum value, just press the "Hold Button" (4-3) once, the
display will show the "REC" symbol only and carry out the memory function continuously.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PCE instruments PCE-T 390 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PCE instruments PCE-T 390 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of PCE instruments PCE-T 390

PCE instruments PCE-T 390 User Manual - German - 14 pages

PCE instruments PCE-T 390 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info