731546

PCE instruments PCE-MSM 4 Manual

27
Zoom out
Zoom in
Previous page
1/36
Next page
© PCE Instruments
24
English
5.3 Settings
5.3.1 Date and time settings
To change the date and time settings, follow these steps:
1. While holding down the "SETUP" button, turn the unit on. Release the "SETUP"
button when the "TIME" icon appears on the display. Now you get to the date and
time settings. The display shows the date.
2. Press the "SETUP" button to enter the minute settings. The display now shows "nn"
and above that the set value. You can change the value by pressing the "LEVEL"
button. Then press the “SETUP” button to go to the hour settings.
3. The display now shows “h-A” or “h-P” with the set value above. To change the value,
press the “LEVEL” button. “h-A” stands for AM while “h-P” stands for PM. After that,
press the “SETUP” button to go to the date setting.
4. Now you are in the day settings. The display shows “DATE – d –” and the set day
afterwards. To change the value, press the “LEVEL” button. Then press the “SETUP”
button to go to the month settings.
5. In the month settings, the display shows “DATE – H – ” and the set month. To change
the value, press the “LEVEL” button. Then press the “SETUP” button to go to the year
settings.
6. In the year settings, the display shows “DATE – Y – ” and after that the last two digits
of the year. To change the value, press the “LEVEL” button.
Note: You can confirm and exit the settings at any time by pressing and holding the
“HOLD” button.
To restore the date and time default settings, follow these steps:
1. While holding down the "SETUP" button, turn the unit on. Release the "SETUP"
button when the "TIME" icon appears on the display. Now you get to the date and
time settings. The display shows the date.
2. Press the “SETUP” button until the display shows “rSt”.
3. Press and hold the “HOLD” button to restore default settings.
5.4 Software
5.4.1 Install the USB drivers
To install the USB drivers, follow these steps:
1. Put the supplied CD in the CD-ROM drive of your PC.
2. Access your CD-ROM drive and open the “USB Driver” folder. There are two different
folders in it: “Windows_2K_XP_S2K3_Vista” and “Windows_7”.
3. Open the folder which matches your Windows version and run the
“CP210xVCPInstaller.exe” file.
If you do not know which Windows you are using go to the desktop, right-click on “My
Computer” and select “Properties”. A new window appears where you can see your
Windows version.
4. Click on “Install” in the software installer to start the installation.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PCE instruments PCE-MSM 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PCE instruments PCE-MSM 4 in the language / languages: English, German as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info