518739

Partner P340S Manual

6
Zoom out
Zoom in
Previous page
1/282
Next page
-- 5 --
WARNING:
Kickback can lead to
dangerous loss of control of the chain saw
and result in serious or fatal injury to the
saw operator or to anyone standing close
by. Always be alert. Rotational kickback
and pinch-kickback are major chain saw
operational dangers and the leading cause
of most accidents.
Your Chain Saw is provided with a safety
label located on the chain brake lever/hand
guard. This label, along with the safety
instructions on these pages, should be
carefully read before attempting to operate
this unit.
IMPORTANT SAFETY
ASSEMBLY INSTRUCTIONS
WARNING: RED Used to warn that
an unsafe procedure should not be
performed.
WARNING: DO NOT start saw
engine until unit is properly prepared.
WARNING: Always wear protective
gloves when handling chain.
HOW TO READ SYMBOLS AND
COLORS (FIG.1)
WARNING
1. Beware of kickback.
2. Do not attempt to hold saw with one
hand.
3. Avoid bar nose contact.
RECOMMENDED
4. Hold saw properly with both hands.
You will need these tools to assemble your
chain saw:
1. Combination wrench-screwdriver (cont-
ained in your user’s kit).
2. Heavy duty work gloves (user supplied).
TO INSTALL GUIDE BAR:
To ensure the bar and chain receive oil,
ONLY USE THE ORIGINAL STYLE BAR
with the oil passage hole (A) as illustrated
above. (Fig.3A)
1. Make sure the CHAIN BRAKE lever is
pulled back into the DISENGAGED
position (Fig. 3B)
2. Remove the bar retaining nut
(B). Remove the CHAIN BRAKE cover
(C) by pulling straight out, some force
may be required. (Fig.3C).
Note: Discard the two plastic washers.They
are only used for shipping the chain saw.
3. Using a screwdriver, turn the adjustm-
ent screw (D) COUNTERCLOCKWISE
until the TANG (E) (projecting prong) is to
the end of its travel (Fig. 3D).
4. Place the slotted end of the guide bar
over the bar bolt (F). Slide guide bar
behind clutch drum
(G) until the
guide
bar stops (Fig.3E).
Your new chain saw will require adjustment
of chain, filling the fuel tank with correct fuel
mixture and filling the oil tank with lubricating
oil before the unit is ready for operation.
Read the entire user manual before
attempting to operate your unit. Pay
particular attention to all safety
precautions.
Your user manual is both a reference guide
and handbook provided to furnish you
with general information to assemble,
operate and maintain your saw.
GREEN RECOMMENDED
Recommended cutting procedure.
1 2
3 4
Fig. 1
DANGER! BEWARE OF KICKBACK!
Fig. 2A
A
A
B
A
A
B
C
Fig. 2B
BEWARE OF:
ROTATIONAL
KICKBACK
(Fig. 2A)
A = Kickback path
B = Kickback
reaction zone
THE PUSH (PINCH
KICKBACK) AND
PULL REACTIONS
(Fig. 2B)
A = Pull
B = Solid objects
C = Push
TOOLS FOR ASSEMBLY
ASSEMBLY REQUIREMENTS
GUIDE BAR / SAW CHAIN / CLUTCH
COVER INSTALLATION
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Partner P340S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Partner P340S in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 6,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info