Manual Parkside XQ 600 - KH 3168 (page 6 of 12) (English)

558712

Zoom out

Zoom in

1/12

8 GB/IE/CY

Avoid touching earthed surfaces such as

pipes, radiators, ovens and refrigerators

with any part of your body. There is an in-

creased risk of electric shock if your body is earthed.

c) Keep the device away from

rain or moisture. Water entering

an electrical device increases the risk

of electric shock.

Do not use the mains lead for

any purpose for which it was

not intended, e.g. to carry the

device, to hang up the device or to pull

the mains plug out of the mains socket.

Keep the mains lead away from heat,

oil, sharp edges or moving parts of the

device. Damaged or tangled mains leads in-

crease the risk of electric shock.

e) When working outdoors with an electri-

cal power tool always use extension ca-

bles that are also approved for use out-

doors. The use of an extension cable suitable for

outdoor use reduces the risk of electric shock.

f) Use a residual current device (RCD)

for protection if operating the electri-

cal power tool in a moist environ-

ment is unavoidable. The use of an RCD

reduces the risk of electric shock.

3. Personal safety

Remain alert at all times, watch what you

are doing and always proceed with cau-

tion. Do not use the device if you are tired

or under the influence of drugs, alcohol or

medication.

One moment of carelessness

when using the device can lead to serious injury.

Wear personal protective

equipment and always

wear safety glasses. The

wearing of personal protective equipment such

as dust masks, non-slip safety shoes, safety

helmets or ear protectors, appropriate to the

type of electrical power tool used and work

undertaken, reduces the risk of injury.

Avoid unintentional operation of the de-

vice. Make sure that the switch is in the

“OFF” position before you insert the

mains plug into the mains socket. Acci-

dents can happen if you carry the device with your

ﬁnger on the switch or you have already switched

the device on before you connect it to the mains.

d) Remove any setting tools or spanners

before you switch the device on. A

tool or spanner left attached to a rotating part

of a device can lead to injury.

e) Do not overestimate your own abili-

ties. Keep proper footing and balance

at all times. By doing this you will be in a

better position to control the device, especially

in unforeseen circumstances.

f) Wear suitable clothing. Do not wear

loose clothing or jewellery. Keep your

hair, clothing and gloves clear of mov-

ing parts. Loose clothing, jewellery or long

hair can become trapped in moving parts.

g) If vacuum dust extraction and collec-

tion devices are fitted do not forget to

check that they are properly connect-

ed and correctly used. The use of these

devices reduces the hazard presented by dust.

4. Careful handling and use of

electrical power tools

a) Do not overload the device. Always use

an electrical power tool that is intended

for the task you are undertaking. By us-

ing the right electrical power tool for the job you

will work more safely and achieve a better result.

b) Do not use an electrical power tool if

its switch is defective. An electrical pow-

er tool that can no longer be switched on and

oﬀ is dangerous and must be repaired.

c) When not in use always ensure that

electrical power tools are kept out of

reach of children. Do not let anyone use

the device if he or she is not familiar

with it or has not read the instructions

and advice. Electrical power tools are danger-

ous when they are used by inexperienced people.

General safety advice

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside XQ 600 - KH 3168 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside XQ 600 - KH 3168

Parkside XQ 600 - KH 3168 User Manual - German, Dutch, French, Italian, Portuguese - 52 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside XQ 600 - KH 3168 Manual

Product: