706372

Parkside PZKS 1500 B2 - IAN 280657 Manual

91
Zoom out
Zoom in
Previous page
1/106
Next page
86
GB / IE / NI
29. Screw for workpiece support
30. Fastening bolt
31. ON/OFF switch for laser
32. Adjustment screw (90°)
33. Screw for stop rail
34. Adjustment screw (45°)
35. Flange bolt
36. Outer flange
37. Saw shaft lock
38. Inner flange
39. Screw for Laser fixing
a) 90° stop angle (not supplied)
b) 45° stop angle (not supplied)
c) Locking nut
d) Allen key, 6 mm
e) Allen key, 4 mm
3. Scope of delivery
• Openthepackagingandremovethe
device carefully.
• Removethepackagingmaterialaswell
as the packaging and transport bracing
(if available).
• Checkthatthedeliveryiscomplete.
• Checkthedeviceandaccessoryparts
(Fig. 3) for transport damage.
• Ifpossible,storethepackaginguntilthe
warranty period has expired.
ATTENTION
The device and packaging materials are
not toys!Children must not be allowed
to play with plastic bags, film and small
parts! There is a risk of swallowing and
suffocation!
•Slidingcrosscutmitresaw
•2xClampingdevice
•2xWorkpiecesupport
•Sawdustbag
•Allenkey6mm
•Allenkey4mm
•2xcarbonbrush
•Operatingmanual
•Mitrelockhandle
•Carryhandle
•2xscrewsforcarryhandle
4. Intended use
The sliding cross cut mitre saw is designed to
crosscut wood and plastic respective of the
machine’s size.The saw is not designed for
cutting firewood.
Warning!
Not use the saw to cut materials
other than those specified described in
manual.
Warning!
The supplied saw blade is only
intended for the sawing of wood! Do not use
this blade for the sawing of plastic!
The equipment is to be used only for its
prescribed purpose. Any other use is deemed
to be a case of misuse. The user / operator
and not the manufacturer will be liable for
any damage or injuries of any kind caused
as a result of this.
The equipment is to be operated only with
suitable saw blades. It is prohibited to use
any type of cuttingoff wheel.
To use the equipment properly you must also
observe the safety information, the assembly
instructions and the operating instructions
to be found in this manual. All persons who
use and service the equipment have to be
acquainted with this manual and must be
informed about the equipment’s potential
hazards. It is also imperative to observe the
accident prevention regulations in force in
your area. The same applies for the general
rules of health and safety at work.
The manufacturer will not be liable for any
changes made to the equipment nor for any
damage resulting from such changes. Even
when the equipment is used as prescribed it
is still impossible to eliminate certain residual
Scope of delivery/Intended use
… 91 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PZKS 1500 B2 - IAN 280657 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PZKS 1500 B2 - IAN 280657 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info