706372
90
Zoom out
Zoom in
Previous page
1/106
Next page
85GB / IE / NI
applicable regulations that apply for the
operation of the machine in your country.
Keep the operating instructions package
with the machine at all times and store it
in a plastic cover to protect it from dirt and
moisture. Read the instruction manual each
time before operating the machine and
carefully follow its information. The machine
can only be operated by persons who were
instructed concerning the operation of the
machine and who are informed about the
associated dangers. The minimum age
requirement must be complied with.
2. Device description
(Fig. 1-21)
1. Handle
2. ON/OFF switch
3. Release lever
4. Machine head
5. Movable blade guard
6. Saw blade
7. Clamping device
8. Workpiece support
9. Table insert
10. Miter lock handle
11. Miter detent lever
12. Miter angle pointer
13. Laser
14. Miter angle scale
15. Turntable
16. Fixed saw table
16a
.Mounting hole
17. Stop rail
18. Stop for cutting depth limiter
19. Screw for cutting depth limiter
20. Cover plate
21. Sawdust bag
22. Carry handle
23. Bevel angle scale
24. Bevel angle pointer
25. Locking screw for drag guide
26. Drag guide
27. Bevel locking screw
28. Screw for clamping device
1. Introduction
MANUFACTURER:
Ga-Po-Vertrieb GmbH
Heinrich-Horten-Straße 5
47906 Kempen, Germany
DEAR CUSTOMER,
We hope your new tool brings you much
enjoyment and success.
NOTE:
According to the applicable product liability
laws, the manufacturer of the device does
not assume liability for damages to the
product or damages caused by the product
that occurs due to:
• Improperhandling,
• Non-complianceoftheoperating
instructions,
• Repairsbythirdparties,notby
authorized service technicians,
• Installationandreplacementofnon-
original spare parts,
• Applicationotherthanspecified
• Abreakdownoftheelectricalsystemthat
occurs due to the non-compliance of the
electric regulations and VDE regulations
0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the
operating instructions before installing and
commissioning the device. The operating
instructions are intended to help the user to
become familiar with the machine and take
advantage of its application possibilities
in accordance with the recommendations.
The operating instructions contain important
information on how to operate the machine
safely, professionally and economically,
how to avoid danger, costly repairs, reduce
downtimes and how to increase reliability
and service life of the machine.
In addition to the safety regulations in the
operating instructions, you have to meet the
Introduction/Device description
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PZKS 1500 B2 - IAN 280657 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PZKS 1500 B2 - IAN 280657 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info