Manual Parkside PWH 2800 A1 - IAN 354711 (page 29 of 160) (English, German, Dutch, Danish, French, Polish, Spanish)

764038

Zoom out

Zoom in

1/160

IEGB

To restart:

1. Allow the engine to cool.

2. Turn the rotary switch (2) to the

OFF position.

3. Press the reset button (1).

4. Turn the device on again (see section

“Switching on and off”).

Working instructions

General working instructions

When shredding, maintain

enough distance from the

device, as long branches can

rebound when fed in. There

is a risk of injury.

Wear eye and hearing protection

Wear safety gloves.

• For safety reasons, the device will not

work if the collection box is not in the

correct position (see 11 / 11).

• When feeding branches into the de-

vice, hold them until they feed in auto-

matically.

• Be sure to check the infeed speed of

the shredder and do not overload the

device.

• To prevent clogging, alternate the

shredding of branches with thin twigs

and wilted garden waste that has been

stored for several days.

• Remove soil and stones from roots befo-

re shredding.

• Do not shred soft, damp material such

as kitchen waste. Compost it instead.

• Pick up a few dry branches at the end

and use them to help clean the device.

• Only switch off the device when all

shredded material has passed through

the cutting roll area. Otherwise, the

cutting roll can become blocked when

restarting.

Removing blockages

Changing rotational direction:

Slide the rotary switch

(2) lock (2a) in the

direction of the power

cable.

2. Turn the rotary switch to the left. The

device is now in inching mode.

→ jammed shredded material is re-

leased.

3. Change the rotational direction again

to continue shredding (see section

“Operation/switching on and off”).

Changing the distance of the pres-

sure plate:

For stubborn blockages, you can also in-

crease the distance between the pressure

plate and the cutting roll.

1. Turn the adjuster screw (8) coun-

ter-clockwise ( + ).

2. Run the cutting roll backwards as de-

scribed in “Changing rotational directi-

on”.

3. When the jammed material is free,

you must readjust the pressure plate by

turning the adjuster screw (see section

“Operating instructions/adjusting the

pressure place”).

Unscrewing the housing plate

Blockages in the device can be removed

after unscrewing the housing plate.

Switch off the device and unplug

the mains plug.

Wear gloves when handling the

cutting roll.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWH 2800 A1 - IAN 354711 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 2,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PWH 2800 A1 - IAN 354711 Manual

Product: