Manual Parkside PWH 2800 A1 - IAN 354711 (page 28 of 160) (English, German, Dutch, Danish, French, Polish, Spanish)

764038

Zoom out

Zoom in

1/160

GB IE

the safety switch (10) are in the correct

position.

The device will not turn on if the

collection box and safety switch are

not in the correct position.

Switching on and off

Make sure that the mains voltage

matches the details on the type pla-

te.

1. Make a loop in the end of

the extension cable and

suspend this in the cable

strain relief (7) on the mains

cable (6).

2. Re-connect the extension cable.

3. Make sure that the hopper (3) is empty

before switching on.

To start the device,

slide the rotary

switch (2) lock

(2a) in the direction

Turn the rotary switch to the right. The

device is now in continuous operation.

5. Fill the hopper with the material to be

shredded (3).

→ The material is drawn in and sh-

redded.

6. To turn off, turn the rotary switch (2) left

to the OFF position.

The device will continue to run after

switching off.

Changing the rotational

direction (reverse)

You can change the rotational direction of

the cutting roll (reverse) to remove jammed

material.

Slide the rotary

switch ( 2) lock

(2a) in the direc-

tion of the power

cable.

2. Turn the rotary switch to the left. The

device is now in inching mode.

→ jammed shredded material is re-

leased.

3. Change the rotational direction again

to continue shredding (see section

“Operation/switching on and off”).

Emptying the

collection box

Empty the collection box regularly.

Be aware that the collection box lls

unevenly under the discharge chute!

1. Switch off the device and unplug the

mains plug from the socket.

2. Unlock the collection box (11) by mo-

ving the safety switch (10) to the “OFF”

position.

3. Remove the collection box from the

chassis (9) and empty it.

4. Make sure that the area around the sa-

fety switch is free of wood chips before

inserting the collection box again.

5. Put the collection box back in place

and move the safety switch up as far as

it will go.

Overload protection

If the motor is overused, e.g.if the cutting

roll is blocked due to branches that are too

thick, the device switches off automatically.

Restart lock

If the device automatically shuts down due

to overuse, it will not restart automatically.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWH 2800 A1 - IAN 354711 in the language / languages: English, German, Dutch, Danish, French, Polish, Spanish as an attachment in your email.

The manual is 2,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PWH 2800 A1 - IAN 354711 Manual

Product: