762966

Parkside PWD 30 A1 - IAN 340059 Manual

10
Zoom out
Zoom in
Previous page
1/52
Next page
10
GB IE NI CY
Operation
Fully unwind the suction hose
(20) before commencing work.
Switching on/off
Connect the mains plug.
To vacuum dust, plug the electrical
tool onto the mains socket on the
vacuum ( 11).
Only connect electrical appliances with a
maximum power rating of 1400 W.
Switching on the vacuum cleaner
(Permanent operation):
Move the On/Off switch (13) to the “I”
position.
Switch on electrical appliance +
vacuum cleaner:
1. Move the On/Off switch
(13) to the position
2. Switch on electrical appliance.
Switching on the electrical appli-
ance automatically switches on the
vacuum cleaner. Once the electrical
appliance has been switched off,
the vacuum cleaner switches off fol-
lowing a time lapse.
Switching off the vacuum cleaner:
Move the On/Off switch (13) to the
“0” position.
Airow Control
The airow can be continuously adjusted
by turning the airow controller ( 3).
MIN: minimum airow
MAX: maximum airow
When vacuuming with low-
powered electrical tools (such as
grinders or jigsaws), open the air
regulator on the handle (17). This
increases the suction power. To do
this, push the ring of the air regula-
tor upwards to three possible levels.
Work breaks
If you want to store away the assembled
suction equipment when you take a break,
you can
push the telescopic suction tube (18)
together and insert the suction tube
holder (19) into the accessory holder
(2a) on the motor head (2);
the telescopic suction tube (18) can be
placed in the retaining bracket (28).
Dry vacuuming
The appliance is supplied with the
uted lter (14) tted.
Ensure that the folded lter (14) is
dry.
Vacuuming with a uted lter:
1. To vacuum dry, t the uted lter (14)
onto the lter basket (3b) on the motor
housing (3). Here, the upward curved
sealing lip must point away from the
motor housing.
If the sealing lip of the folded lter
(14) does not spontaneously touch
the motor head (2), turn the cover
plate (14a) a little without force un-
til the inside latch of the cover plate
(14a) releases the folded lter (14).
You can now lightly push the folded
lter (14) onto the motor head (2).
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PWD 30 A1 - IAN 340059 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWD 30 A1 - IAN 340059 in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PWD 30 A1 - IAN 340059

Parkside PWD 30 A1 - IAN 340059 User Manual - German - 24 pages

Parkside PWD 30 A1 - IAN 340059 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info