762966
9
Zoom out
Zoom in
Previous page
1/52
Next page
9
IEGB NI CY
Switch the machine off and dis-
connect the mains plug:
- when the machine is not in use,
- before the machine is opened
up,
- for all maintenance and clean-
ing work,
- if the connecting cable is dam-
aged or tangled up.
Never use the mains lead to pull
the plug out of the socket or to pull
the appliance. Protect the cable
from heat, oil, and sharp edges.
Make sure that the mains volt-
age corresponds with the infor-
mation on the rating plate.
Only plug the appliance into a
socket which is safeguarded.
The device must only be con-
nected to a mains socket via a
residual-current circuit breaker
(RCD) with a rated leakage cur-
rent of not more than 30mA.
Do not expose the unit to rain
CAUTION! The following
states how damage to the ap-
pliance and possible injury to
people can be avoided:
Ensure that the machine is cor-
rectly assembled and the lters
are in the correct position.
Do not use without the lter. This
could damage the machine.
Only use replacement parts
and accessories delivered and
recommended by our Service
Centre. The use of parts by other
manufacturers immediately ren-
ders the guarantee void.
Only have repairs carried out
at our authorised customer ser-
vice points.
Observe the instructions for
cleaning and maintenance of
the machine.
Store the appliance in a dry place
and out of reach of children.
Assembly
Pull out the mains plug.
Danger of electric shock.
1. Attach the castors (8) with accessory
holders (8a) to the underside of the
container (6).
2. Place the motor housing (2) on top of
the container (6) and close it with the
clips (5).
The motor head (2) can only be placed
in one position on the canister (6).
The air ow control (3) and the device
socket (11) must be above the suction
connection (10).
3. Lightly squeeze together the ends of the
retaining bracket (28) and click it into
the motor housing (2).
4. Installing the accessories:
- Push the vacuum hose (20) into the
suction connection (10) until it locks
in place.
To remove it, press the catch (20a)
and pull the vacuum hose (20).
- Fit the handle with air control (17).
- Install the telescopic suction tube
(18). (Press the button on the tel-
escopic suction pipe towards and
pull out to the desired length).
- Install the nozzle desired ( 23-27).
Nevervacuumwithoutalter!
Accessories such as the crevice noz-
zle ( 25), upholstery nozzle
(26) or car nozzle ( 27) can
be attached directly onto the han-
dle with air regulation (17).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PWD 30 A1 - IAN 340059 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PWD 30 A1 - IAN 340059 in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PWD 30 A1 - IAN 340059

Parkside PWD 30 A1 - IAN 340059 User Manual - German - 24 pages

Parkside PWD 30 A1 - IAN 340059 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info