819958
15
Zoom out
Zoom in
Previous page
1/216
Next page
PTHSA 20-Li B3
10 GBIE
Checking the battery charge level
Press the battery charge level buttoni to
check the status of the battery (see also main
diagram). The status will be shown on the
battery display LEDu as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Inserting/removing the battery pack
Inserting the battery pack
Push the battery packr into the handle until it
clicks into place.
Removing the battery pack
Press the release buttont and remove the
battery packr.
WARNING! RISK OF INJURY!
Before any work on the appliance, remove
the battery. Risk of electric shock!
Fixing/attaching the shoulder strap
Hook the shoulder strape into the carrying
lug9.
Adjust the length of the shoulder strape to
your size so that the carrying lug9 is at hip
height when the strap is hooked in place.
Mounting the motor head on the
telescopic handle
Undo the quick release7 by pressing it in
the direction of the arrow . Pull out the
telescopic handle until the black plastic ring
is exposed.
Place the lower end of the motor head3 on
the upper end of the telescopic handle6 so
that the motor head3 can be pushed through
as far as the black plastic ring. Make sure that
the groove and the recess interlock with each
other.
Tighten the red connecting piece5 by turning
it towards the symbol on the motor head3.
Adjusting the telescopic handle
The telescopic handle6 can be adjusted continu-
ously by means of the quick release7.
Undo the quick release7 by pressing it in the
direction of the arrow and adjust the
length by pushing or pulling as required.
Close the quick release again7 to fix the
desired working length of the telescopic
handle6.
If the screws on the quick-release7 have loos-
ened, tighten them again with the hex keyw.
Adjusting the cutting angle
NOTE
The cutting angle can be adjusted in 11 stages.
Remove the battery packr from the appliance.
Press the release button4.
Adjust the angle of the motor unit to the
required position.
Let go of the release button4 and the motor
unit will click into place.
Insert the battery packr back into the appli-
ance.
Use
NOTE
Comply with regulations regarding noise
protection and local rules. Using the appli-
ance on certain days (e.g. on Sundays and
public holidays), during certain times
(midday, night time) or in certain locations
(e.g. health resorts, clinics, etc.) may be
restricted or prohibited.
Switching on/off
Turn on
Press the safety lock-out0 and keep it pressed
and then press the On/Off switchq. You can
now release the safety lock-out0.
Switching off
Release the On/Off switchq.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PTHSA 20-Li B3 - IAN 405768 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PTHSA 20-Li B3 - IAN 405768 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info