Manual Parkside PTBM 500 A1 - IAN 102855 (page 9 of 58) (English, German, Dutch)

595353

Zoom out

Zoom in

1/58

IEGB

CAUTION!

- The use of other bits and other accessories

can result in a risk of personal injury.

Have your power tool be repaired by a quali-

ed electrician

- This power tool complies with the relevant

safety regulations. Repairs may only be

performed by a qualied electrician,

using original spare parts; otherwise acci-

dents involving the user may result.

Service:

• Have your power tool repaired

only by qualied specialists and

only with original spare parts. This

will ensure that the power tool remains

safe.

Safety Instructions for

Box Column Drills

• Never make the warning labels

on the power tool illegible.

• Attach the power tool to a solid,

at and horizontal surface. If the

power tool can slip or wobble, the bit

may not be guided smoothly and safely.

• Keep the work area clean except

for the workpiece to be machined.

Sharp-edged drilling chips and objects

can cause injury. Material mixtures are

particularly dangerous. Light metal dust

can burn or explode.

• Set the correct speed before st-

arting work. The speed must be

appropriate for the drill diameter

and the material to be drilled. At

an incorrectly set speed the bit may get

jammed in the workpiece.

• Only when the device is turned on

should the bit be moved against

the work piece. Otherwise there is a

danger that the bit will get jammed in the

workpiece and the workpiece will rotate

with the bit. This can lead to injuries.

• Do not put your hands in the area

of the drill while the power tool is

running. Upon contact with the bit is a

risk of injury.

• Never remove drilling chips from

the drilling area while the power

tool is running. Always put the drive

mechanism in the standby position rst

and then turn on the power tool.

• Do not remove accumulated drill

chips with your bare hands. There is

a risk of injury due to hot and sharp metal

shavings in particular.

• Break up long drilling chips by

interrupting the drilling operation

with a short backward rotation of

the rotary wheel. Long drilling chips

may cause injury.

• Keep handles dry, clean and free

from oil and grease. Greasy, oily

handles are slippery and lead to loss of

control.

• Use clamps to hold the workpie-

ce in place. Do not work on any

workpieces that are too small for

clamping. If you hold the workpiece by

hand, you cannot hold it sufciently tightly

against rotation and may hurt yourself.

• Switch the power tool off imme-

diately if the bit jams. The bit jams

when:

- the power tool is overloaded or

- the workpiece to be machined is jam-

med.

• Do not touch the bit after working

before it has cooled down. The bit is

very hot during use.

• Inspect the cable regularly and

have a damaged cable repaired

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PTBM 500 A1 - IAN 102855 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PTBM 500 A1 - IAN 102855

Parkside PTBM 500 A1 - IAN 102855 User Manual - French - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PTBM 500 A1 - IAN 102855 Manual

Product: