722895
12
Zoom out
Zoom in
Previous page
1/69
Next page
PSTDA 20-Li A1
8 GB
IE
NI
Fitting the splinter guard
The splinter guard can prevent the tearing up of
the surface when sawing wood. The splinter guard
can only be used with certain sawblade types
without the sliding shoe
and only at a cutting
angle of 0°.
Press the splinter guard
into the footplate
from below (notch facing upwards).
Fitting the sliding shoe
When working on sensitive surfaces, you can fit
the sliding shoe on the baseplate to prevent
scratching the surface.
Mount the sliding shoe
onto the front of the
baseplate and press it up at the back until it
clicks into place on the baseplate .
To remove the sliding shoe
, unfasten it at
the rear of the baseplate and slide it off the
front.
Use
Setting the cutting angle
Undo the clamping screws with the supplied
hex key and pull the baseplate to the rear.
Adjust the cutting angle to 0°/15°/30°/45°
with the aid of the markings on the baseplate
.
Push the baseplate forwards so that the
locking pin engages in the toothing .
Retighten the clamping screws
with the hex
key.
NOTE
When using a cutting angle of 15°/30°/
45°, the blade guard
and the splinter
guard must be detached beforehand.
Setting the stroke rate
The ON/OFF switch has a variable speed con-
trol. Press the ON/OFF switch lightly for a low
speed. Increasing the pressure increases the speed.
NOTE
The integrated motor brake ensures rapid
stoppage.
Adjusting the pendulum stroke
You can use the pendulum stroke switch
to adjust the pendulum movement of the saw
blade . You can achieve fine, clean-cut edges
without pendulum movement (setting "0").
Deactivate pendulum movement when working
on thin workpieces. You can achieve an increas-
ingly fast work rate if the pendulum stroke is
activated (settings 1–3).
Switching on/off
Switching the appliance on:
Push the safety lock-out
to the left or right
and keep it pressed.
Press the ON/OFF switch
.
Once the saw is running, you can release
the safety lock-out . The working light
illuminates when the ON/OFF switch is
depressed lightly or completely. This provides
illumination of the work area in poor lighting
conditions.
Switching the appliance off:
Release the ON/OFF switch
.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSTDA 20-Li A1 - IAN 279504 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSTDA 20-Li A1 - IAN 279504 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info