722895
11
Zoom out
Zoom in
Previous page
1/69
Next page
PSTDA 20-Li A1
GB
IE
NI 7
Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack:
Allow the battery pack
to click into place in
the appliance.
Removing the battery pack:
Press the release button
and remove the
battery pack.
Checking the battery charge level
Press the battery charge level button to check
the status of the battery (see also main diagram).
The status will be shown on the battery display
LED as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Initial operation
Fitting/changing the saw blade
Remove the battery before carrying out any work
on the power tool (e.g. maintenance, changing
tools, etc.) as well as during the transport and
storage of the power tool.
Unintentional activation of the ON/OFF switch
can result in injury.
Press the blade guard together
at the height
of the outer catches and pull it off to the front.
Turn the quick-release chuck
and hold it
in this position.
Push the required saw blade into the quick-
release chuck
as far as the stop.
Release the quick-release chuck
so that it
returns to its initial position. The saw blade is
now locked.
CAUTION! The saw blade teeth must face the
front (see fold-out page)!
Fitting the blade guard
Fit the blade guard before you connect the
appliance to a dust extractor.
Fit the blade guard
onto the appliance
so that the two outer catches engage in the
recesses in the housing.
Remove the blade guard
for working without
a dust extractor or when making mitre cuts.
To do this, press the blade guard together
at the height of the outer catches and pull it
off to the front.
Fitting the rip fence
The rip fence can be fitted on the left or right
of the appliance.
Undo both the clamping screws on the insertion
openings
.
Push the rip fence
into the insertion openings
.
Retighten the two locking screws.
Connecting the sawdust extractor
Push the extraction nozzle into the vacuum
extraction duct until it is secured in place.
Optional, depending on the diameter of the
dust and sawdust extractor.
Attach an approved dust and sawdust extractor
to the extraction nozzle
.
Wear a dust mask.
Supporting the extraction function:
Press the sawdust blower switch
to the "O"
position.
Sawdust blowing function
Switching the sawdust blowing function on:
Press the sawdust blower switch
to the
position.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSTDA 20-Li A1 - IAN 279504 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSTDA 20-Li A1 - IAN 279504 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info