779388

Parkside PSSAP 20-Li C3 - IAN 337399 Manual

39
Zoom out
Zoom in
Previous page
1/140
Next page
38 GB/IE
Trial run
NOTE
uAlways carry out a no-load trial run
before starting work and after every saw
blade replacement. Switch the product off
immediately if the saw blade is not running
smoothly, if considerable vibration occurs
or if you hear abnormal noises.
Working instructions
m CAUTION! RISK OF INJURY AND
DAMAGE TO PROPERTY!
uWear gloves when handling the saw blade.
In this way, you avoid injury from cuts.
uDo not use any blunt or bent blades or
blades which are damaged in any other
way.
uBefore sawing the workpiece, check for
hidden foreign objects such as nails,
screws. These must be removed.
uAlways insert a suitable saw blade.
uSecure the workpiece with the aid of
clamping devices on the workbench.
uApply only as much pressure as is required
for sawing. If there is excessive pressure,
the sawing blade may bend and break.
uSwitch the product off immediately if the
sawing blade jams.
Spread the saw cut out and pull the blade
out carefully.
m CAUTION! RISK OF INJURY AND
DAMAGE TO PROPERTY!
uAlways stand to the side of the product
when working.
uAlways make sure that the workplace is
well ventilated.
uAvoid over-stressing the product while
working.
Regular cuts
Verify the saw blade is not touching the
workpiece. Then, switch on the product.
Apply the base plate [4] to the workpiece.
Use even pressure, advancing at a steady
pace when making your cut. You can make
horizontal, diagonal, or vertical cuts.
When you are finished: First, switch off the
product. Then, pull the saw blade out of the
workpiece.
Plunge cuts
(Fig. J)
Plunge cuts are very challenging and are
associated with a higher risk of injuries. Only
use this technique if you are familiar with it.
Plunge cuts may only be carried out in soft
materials such as wood or plasterboard and
with short blades (max. length 150 mm).
There is a risk of kickback and personal injury.
Place the front edge of the base plate [4] on
the workpiece so that the saw blade does not
touch the workpiece.
Turn the product on. Let the saw blade slowly
plunge into the workpiece.
When the workpiece depth has been cut
through, continue sawing as usual.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSSAP 20-Li C3 - IAN 337399 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSSAP 20-Li C3 - IAN 337399 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info