Manual Parkside PSS 65 A1 - IAN 102874 (page 10 of 100) (English, German, Dutch, Danish, Swedish, Finnish)

595348

Zoom out

Zoom in

1/100

GB IE

Mount the sharpener

1. Select one of the three sharpen-

ers.

2. In order to remove a sharpener

from the working position, you

must press down the release le-

ver for the sharpener (13).

3. Remove the sharpener from the

guide rails, upwards.

4. In the storage positions, the

sharpeners are not xed to the

right and left side and can be

easily removed from the guide

rails.

5. In order to fasten the selected

sharpener in the working posi-

tion, from above push this into

the guide rails. Press the sharp-

ener down until it snaps into

place.

The sharpeners also present

a safety device. Never use

this device without a sharp-

ener. Risk of injury!

Operation

Caution! Risk of injury!

- Always disconnect the plug from

the mains socket before working.

- Use only grinding disks and acces-

sories recommended by the manu-

facturer. The use of other insertion

tools and other accessories may

cause risk of injury.

- Never operate the device without

the visual protection disk.

- Switch on the equipment only when

it is safely installed on the work sur-

face.

Despite spark protection, al-

ways wear safety goggles

while working in order to

avoid eye injuries.

Keep your hands away from

the grinding disc and grind-

ing belt when the device is in

operation. Injury hazard!.

Switching on and off

Ensure that the mains voltage

matches the specications on the

rating plate.

Connect the equipment to the mains.

1. To switch on, press the “I” On switch

and the device starts up (see

3).

2. To switch off, press the “0” off switch

and the device switches off (see

3).

After switching on the device, wait until the

device has reached its max. speed. Only

then must you start with the grinding.

The disk will continue to

run after the equipment is

switched off. There is a risk

of injury.

Test run:

Before starting work and after each

change of grinding disk, carry out a test

run of at least 60 seconds with no load.

Switch off the equipment immediately if the

disk runs lumpy, substantial vibrations oc-

cur, or abnormal noises are generated.

Bonjour, je recherche le support de foret placé en façade. Pièce ronde. Merci
tlizicska@free.fr Submitted on 20-11-2022 at 11:08
Reply Report abuse
Bonjour , existille la traducion en francais , merci cela serrais tres utile en france , cordialement a vous .

durand.jeanmarie1@free.fr

Merci d'avance Submitted on 24-4-2017 at 11:53
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSS 65 A1 - IAN 102874 in the language / languages: English, German, Dutch, Danish, Swedish, Finnish as an attachment in your email.

The manual is 2,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PSS 65 A1 - IAN 102874

Parkside PSS 65 A1 - IAN 102874 User Manual - French - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PSS 65 A1 - IAN 102874 Manual

Product: