Manual Parkside PSS 310 - KH 3123 (page 5 of 10) (English)

558606

Zoom out

Zoom in

1/10

OPERATION

Take note of the mains voltage. The voltage must agree with that shown on the identification plate (equipment

shown as 230 V can also be used with 220 V).

SWITCHING ON AND OFF

SWITCH ON SANDER = press switch

ቩ

SWITCH OFF SANDER = press switch ቩ again

SETTING THE SPEED

You can set the required speed using the adjuster wheel ቪ (see Fig ተ) as required. As the setting depends on

what kind of material you are working with, use the recommendations and examples given in Tips and Tricks.

FITTING THE SANDING SHEETS

Note: before fitting a new sanding sheet, remove dust and dirt from the base ቤ.

1. Lift both clips

ቢ to open them to insert a new sanding sheet or change the sanding sheet for

use on a different material.

2. Push the sanding sheet

ባ under the open clip at one end and clamp it securely on the base by

moving the clip down again.

3. Do the same at the other end. Make sure that the sanding sheet

ባ is tight against the base. See Figures ቭ and ቮ.

4. Important! - The holes in the sanding sheet

ባ and the base ቤ must align for the dust to be extracted through the

base. See Figure

ቯ.

Different materials need different grades of sanding sheets. To determine which grade is suitable for your work,

please read our recommendation in Tips and Tricks.

DUST EXTRACTION

• DUST EXTRACTION WITH PAPER DUST BAG

Push the paper dust bag

ቧ on to the adapter ቦ. Ensure that the adapter fits correctly into the holder.

Clip the dust bag with the adapter to the side of the sander.

• DUST EXTRACTION WITH VACUUM CLEANER

For dust extraction using a vacuum cleaner use the appropriate connector – see Figure

ቫ. Attach the adapter to

the end of the vacuum cleaner hose and clip it to the side of the equipment.

MAINTENANCE OF THE ORBITAL SANDER

1. Clean the sander regularly. For the best results do this straight after the work has been completed.

2. Do not allow liquids to get inside the sander. Use a soft cloth for cleaning the housing. Do not use petrol,

solvents or cleaners that may attack the plastic.

3. Air vents must always be clear and clean.



+ www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++

4 manual GB (+IRL)_Helv 17.06.2003 14:21 Uhr Seite 5

Where can I buy sanding sheets for a Parkside sander PSS310 Submitted on 10-6-2021 at 10:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSS 310 - KH 3123 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PSS 310 - KH 3123

Parkside PSS 310 - KH 3123 User Manual - German, Dutch, French - 22 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PSS 310 - KH 3123 Manual

Product: