763012

Parkside PSKO 24 A1 - IAN 354867 Manual

20
Zoom out
Zoom in
Previous page
1/32
Next page
16 GB
23. Avoid over-stressing the piping system by using flexible
hose connections to prevent kinking.
24. Use a residual current circuit breaker with a trigger
current of 30 mA or less. Using a residual current circuit
breaker reduces the risk of an electric shock.
Additional safety instructions
Observe the corresponding operating manuals of
the respective compressed air tools / compressed
air attachments! The following general warnings must also
be observed.
Safety instructions for working with compressed
air and blasting guns
• Ensure there is sufficient distance to the product, at least
2.50 m, and keep the compressed air tools / compressed
air attachments away from the compressor during operation.
• The compressor pump and lines can become very hot during
operation. Touching these parts will burn you.
• The air which is sucked in by the compressor must be kept
free of impurities that could cause fires or explosions in the
compressor pump.
• When releasing the hose coupling, hold the hose coupling
piece with your hand. This way, you can protect yourself
against injury from the rebounding hose.
• Wear safety goggles and a respirator when working with
the compressed air pistol. Dusts are harmful to health!
Injuries can be easily caused by foreign objects and blown
away parts.
• Do not blow at people with the blow-out pistol and do not
clean clothes while being worn. Danger of injury!
Safety instructions when using spraying
attachments (e.g. paint sprayers)
• Keep the spray attachment away from the compressor when
filling so that no liquid comes into contact with the compressor.
• Never spray in the direction of the compressor when using
the spraying attachments (e.g. paint sprayers). Moisture can
lead to electrical hazards!
• Do not process any paints or solvents with a flash point be-
low 55 °C. Risk of explosion!
• Do not heat up paints or solvents. Risk of explosion!
• If hazardous liquids are processed, wear protective filter
units (face guards). Also, adhere to the safety information
provided by the manufacturers of such liquids.
• The details and designations of the Ordinance on Hazardous
Substances, which are displayed on the outer packaging
of the processed material, must be observed. Additional
protective measures are to be undertaken if necessary,
particularly the wearing of suitable clothing and masks.
• Do not smoke during the spraying process and/or in the
work area. Risk of explosion! Paint vapours are easily
combustible.
• Never set up or operate the equipment in the vicinity of a fire
place, open lights or sparking machines.
• Do not store or eat food and drink in the work area. Paint
vapours are harmful to your health.
• The work area must exceed 30 m³ and sufficient ventilation
must be ensured during spraying and drying.
• Do not spray against the wind. Always adhere to the
regulations of the local police authority when spraying
combustible or hazardous materials.
• Do not process media such as white spirit, butyl alcohol and
methylene chloride with the PVC pressure hose. These media
will destroy the pressure hose.
• The work area must be separated from the compressor so that
it cannot come into direct contact with the working medium.
Operation of pressure vessels
• Anyone who operates a pressure vessel must keep this
in good working order, operate and monitor it correctly,
perform the necessary maintenance and servicing works
immediately and implement safety measures as required
according to the circumstances.
• The regulatory authority can instruct necessary monitoring
measures in individual cases.
• A pressure vessel must not be operated if it exhibits a defect
that poses a danger to personnel or third parties.
• Check the pressure vessel for rust and damage each time
before use. The compressor shall not be operated if the
pressure vessel is damaged or rusty. If you discover damage,
please contact the customer service workshop.
Keep these safety instructions in a safe place.
Residual risks
Comply with the stipulated maintenance and safety instructions
in the operating instructions.
Remain attentive at all times when working, and keep third
parties at a safe distance from your work area.
Even when the device is being used properly, there will always
be certain residual hazards that cannot be completely ruled
out. The following potential hazards can arise due to the type
and design of the device:
• Unintentional starting up of the product.
• Damage to hearing if the stipulated hearing protection is not
worn.
• Dirt particles, dust etc. can get irritate the eyes or face
despite wearing safety goggles.
• Inhaling swirled up particles.
Warning!
This power tool generates an electromagnetic field during
operation. This field can impair active or passive medical
implants under certain conditions. In order to prevent the risk
of serious or deadly injuries, we recommend that persons
with medical implants consult with their physician and the
manufacturer of the medical implant prior to operating the
power tool.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSKO 24 A1 - IAN 354867 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSKO 24 A1 - IAN 354867 in the language / languages: English, German as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info