Manual Parkside PSBS 240 B2 - IAN 60097 (page 13 of 88) (English, German, Dutch, French, Swedish)

595402

Zoom out

Zoom in

1/88

GB IE

• Only use awless grinding discs

(ringing test: when you strike the

grinding disc with a plastic ham-

mer, it results in a clear sound).

• Never re-drill a locating hole

which is too small to make it

larger.

• Never use separate bushings or

adapters in order to make grind-

ing discs whose hole is too large

t the device.

• Do not use any saw blades.

• To clamp the grinding tools only

use the clamping ange provid-

ed. The pads between the clamp-

ing ange and the grinding tools

must be made of elastic materials

e.g., rubber, soft cardboard etc.

• Always reassemble the device

completely after replacing the

grinding disc.

Switch the device off and remove

the mains plug.

Allow the device to cool down.

Wear protective gloves when

changing the grinding discs in or-

der to avoid cutting damages.

1. Remove the spark protection (

1) (see „Assemble/set spark pro-

tection).

2. Loosen the 3 xing screws (15)

and remove the grinding disc

cover (16).

3. Loosen the xing screws (11) and

remove the grinding belt cover

(12) (see „Changing the grinding

belt“).

4. Unscrew the grinding disc nut

(19a) in the clockwise direction,

by holding the nut of the opposite

roller of the grinding belt in place

(see small image).

5. Remove the clamping ange

(19b) and the grinding disc (19).

6. Set up the new grinding disc (19)

and the clamping ange and

manually screw the grinding disc

nut (19a) in the anti-clockwise

direction.

7. Screw the grinding disc cover

(16).

8. Set the spark protection (

and the workpiece support (

18) so that the distance between

the grinding disc (19) is max.

2mm (see „Assembly“).

The grinding disc nut must not be

screwed too tightly in order to

avoid a breaking of the grinding

disc and nut.

Test run:

Before starting work and after each

change of grinding disk, carry out a test

run of at least 60 seconds with no load.

Switch off the equipment immediately if the

disk runs lumpy, substantial vibrations oc-

cur, or abnormal noises are generated.

Cleaning and

maintenance

Disconnect the plug before adjust-

ment, maintenance or repair.

Have any work not described

in these instructions carried

out by a specialist workshop.

Use only original components.

Allow the equipment to cool

before carrying out any main-

tenance and cleaning work.

There is a risk of burns.

Hi , Where can i get parts for my PSBS 240 C2 . I am wanting nuber 18 / 17 17a . on the manual sheet , Thanks Submitted on 26-8-2023 at 10:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBS 240 B2 - IAN 60097 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 1,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PSBS 240 B2 - IAN 60097 Manual

Product: