Manual Parkside PSBS 240 B2 - IAN 60097 (page 12 of 88) (English, German, Dutch, French, Swedish)

595402

Zoom out

Zoom in

1/88

GB IE

After switching on the device, wait until the

device has reached its max. speed. Only

then must you start with the grinding.

The disk will continue to

run after the equipment is

switched off. There is a risk

of injury.

Test run:

Before starting work and after each

change of grinding disk, carry out a test

run of at least 60 seconds with no load.

Switch off the equipment immediately if the

disk runs lumpy, substantial vibrations oc-

cur, or abnormal noises are generated.

Grinding with the grinding

disc

The arrow on the protective hood

(

3) shows the direction of rota-

tion of the grinding disc.

• Place the workpiece on the workpiece

support (

18) and slowly bring it to

its desired angle on the grinding disc

(

19).

• Move the workpiece slightly from side

to side in order to achieve an optimal

grinding result. This way, the grinding

disc is worn uniformly. Occasionally,

allow the workpiece to cool down.

Tape loops

The arrow on the protective hood

(

9) shows the direction of rota-

tion of the grinding belt.

• Firmly hold the workpiece, do not exert

any strong force.

• Move the workpiece slightly from side

to side in order to avoid a one-sided

wear of the grinding belt.

• Always grind the pieces of wood in the

direction of the wood grain in order to

avoid chipping.

Change grinding belt

1. Loosen the 3 xing screws (11)

and hang out the grinding belt

cover (12).

2. Loosen the clamping screw (8) by

a few rotations.

3. Press the clamping lever (7) down-

wards and detract the grinding

belt (10).

4. Place the new grinding belt (10)

in the centre on the upper (20a)

and lower (20b) rollers and let go

of the clamping lever (7).

5. Tighten the clamping screw (8) and

mount the grinding belt cover (12).

Set the tape run:

6. Loosen the nut (21a) of the ad-

justable screw (21) with a ring

spanner. The tape run accuracy is

set by the turning the adjustable

screw (21) with a screwdriver.

7. Check the tape run by manually

turning the grinding belt.

8. Re-tighten the nut (21a).

Change grinding disc

Information on replacement:

• Never operate the device without

protective equipment.

• Ensure that the rotation speed

stated on the grinding disc (

19) is the same or higher than the

nominal rotation speed of the de-

vice.

• Ensure that the grinding disc

dimensions match those of the de-

vice.

Hi , Where can i get parts for my PSBS 240 C2 . I am wanting nuber 18 / 17 17a . on the manual sheet , Thanks Submitted on 26-8-2023 at 10:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBS 240 B2 - IAN 60097 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 1,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside PSBS 240 B2 - IAN 60097 Manual

Product: