744061
42
Zoom out
Zoom in
Previous page
1/55
Next page
42 GB/MT
chuck
11
can be opened simply by turning it in the
direction of the arrow (see labelling at the front of
the drill chuck “
AUF / OPEN”).
After you have inserted the tool you wish to have, turn
the drill chuck in the direction of the arrow until you
cannot hear any click any more (see the labelling on
the front of the drill chuck “
ZU / CLOSE”). The
drill chuck will then lock automatically. The spindle
lock releases itself automatically when the motor is
started (by operation of ON
/
OFF swit
ch
6
).
Switching On / Off
To start the device, press the ON / OFF switch
6
and keep it pressed.
To switch off the device, release the ON / OFF
switch
6
.
Activating the lock
Press the rotational direction switch
5
into the
middle position. The ON
/
OFF swit
ch
6
is
now blocked.
Setting the speed
The ON / OFF switch
6
has a variable speed
regulator.
Increasing the speed:
Increase the pressure on the ON / OFF switch
6
.
Reducing the speed:
R
educe the pressure on the ON
/
OFF swit
ch
6
.
The integral motor brake quickly brings the
device to a standstill – which is ideal e.g. for
screwing in a series of screws.
Reversing the direction
of rotation
Push the direction of rotation switch
5
fully
through to the right or left to reverse the direc-
tion of rotation.
Tips and tricks
Drilling in metal: Use a metal drill bit (HSS).
For the best results, you should cool the bit with oil.
Metal drill bits can also be used to drill into plastic.
Drilling in stone: Use a hardened-metal-tipped
masonry drill bit.
Drilling in wood: Use a wood drill bit with a
centring point. For deep holes, use an auger type
bit. For large diameter holes, use a forstner bit. You
can screw small screws into soft wood without the
need for pre-drilling.
Maintenance and cleaning
The cordless impact drill / driver is maintenance-free.
Clean t
he device frequently. This should be done
immediately after you have finished using it.
Use a dr
y cloth to clean the outside of the
device - never use petrol, solvents or cleaners.
Never open up the device.
Always have any repairs carried out or replace-
ment parts fitted at the service centre or by an
electrical equipment repair specialist.
Service
Have your device repaired
at the service centre or by qualified
specialist personnel using original
manufacturer parts only. This will ensure
that your device remains safe to use.
If the plug or lead needs
to be replaced, always have the
replacement carried out by the manu-
Preparing for use / Maintenance and cleaning / Service
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PSBS 24 A1 IAN 64192 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PSBS 24 A1 IAN 64192 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside PSBS 24 A1 IAN 64192

Parkside PSBS 24 A1 IAN 64192 Usermanual and installation guide - German, Dutch, French, Italian - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info