779472

Parkside PRTA 20-Li C3 - IAN 351753 Manual

17
Zoom out
Zoom in
Previous page
1/108
Next page
17
GB IE NI
may otherwise irreparably damage the
appliance.
• After every trimming session, remove
grass and soil from the protective cover
and the trimming assembly.
• Be careful with the line cutter. It can
cause serious lacerations.
General maintenance
• Prior to every use, check the appliance
for obvious defects such as loose, worn
or damaged parts. Ensure that the
screws in the cutting device are rmly
in place.
• Check covers and safety devices for
damages and correct installation. Re-
place as necessary.
Replacing the spool
The rotation direction of the spool is
indicated in the spool cap (see de-
tailed illustration ) on the spool.
1. Remove the battery ( 17) from the
device.
2. Open the spool cap (13) by simultane-
ously pressing the two releases (20) on
the spool cap (13).
3. Remove the cover of the spool cap (13)
and take out the line spool (14).
4. Press the thread ends of the new spool
out of the spool slots (22).
5. Insert the new spool into the spool cap
(13). The side of the spool on which
the rotation direction is indicated by ar-
rows, must be visible after insertion.
6. Insert both ends of the thread through
the opposite line outlet loops (21).
7. Put the back on the spool cap (13).
Make sure that the latches (20) on the
lid t precisely into the recesses on the
spool cap (13). They will snap in no-
ticeably.
8. Pull on the line ends and press the lock-
ing button (23) repeatedly until the line
ends protrude approx. 1 cm beyond
the line cutter (24).
Check the line cutter (24). Never
use the device without a line cutter
or with a defective line cutter. If the
line cutter is damaged, be sure to
contact one of our customer service
centres.
Winding up the spare
thread
1. Thread an end of the spare thread
through the opening of the spool (25).
2. Wind the thread in the threading direc-
tion of the spool (14). Follow the ar-
rows on the top of the spool (14).
Storage
• Store the trimmer in a dry place well
out of reach of children.
• Do not stand the trimmer on its protec-
tive cover. Suspend it by its upper han-
dle in such a manner that the protective
cover does not come into contact with
other objects. This is because the pro-
tective cover could become deformed,
thereby changing its dimensions and its
safety properties.
• The storage temperature for the re-
chargeable battery and the device is
between 0°C and 45°C. Avoid extreme
cold or heat during storage to ensure
the battery output is not adversely af-
fected.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PRTA 20-Li C3 - IAN 351753 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PRTA 20-Li C3 - IAN 351753 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info