779472
16
Zoom out
Zoom in
Previous page
1/108
Next page
16
GB IE NI
If no line ends are visible: Re-
place the spool (14) (see “Cleaning
and Maintenance”).
Setting the line length manually:
Remove the battery from the device!
Lightly pull on the thread ends and
press the locking button (23) repeat-
edly if necessary until the thread ends
protrude beyond the line cutter (24).
Manner of operation
WARNING. Danger of injury!
Do not cut moist or wet grass.
Before starting the unit, make
sure that the spool is not touch-
ing any stones, scree, or other
foreign objects.
Switch on the trimmer before you
approach the grass that is to be
cut.
Do not overload the trimmer dur-
ing operation.
Avoid contact with obstacles
(stones, walls, fences, etc.). The
nylon thread on the spool would
wear out quickly.
Avoid using the device in bad
weather, especially if there is a
danger of lightning!
Cutting grass
Cut the grass by
swaying the trimmer
sideways to the
right and left. Cut
slowly while the
trimmer is tilted for-
wards by approx.
30°.
Cut tall grass by a series of levels from top
to bottom.
Lawn edge trimming
Setup for edge trimming:
To trim lawn edges, slowly move the appli-
ance along the lawn edges.
Handle rod: 180° (see )
Cutting angle position 5 (see )
Spacer bow in parking position
When working, make sure
that the protective cover pro-
tects you from the cutter.
Cleaning and
maintenance
Warning! Risk of injury from
moving dangerous parts!
Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
Turn off the appliance and, before
doing any servicing, remove the
battery.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
Cleaning
Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush. Do not
use cleaning agents or solvents. You
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside PRTA 20-Li C3 - IAN 351753 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside PRTA 20-Li C3 - IAN 351753 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info